Monday, 01 September 2014
masthead+quote+image
Advanced search

Team prints 'world's first' 3D titanium car components

UK researchers claim to have produced the world’s first 3D-printed titanium car parts, demonstrating how the metal could become cheap enough for commercial production.

Titanium is usually considered too expensive for use in automotive manufacturing but a novel process for producing titanium powder from sand has opened the way for 3D printing parts cheaply enough for low-to-medium volume production, according to engineers from Sheffield University.

The process, created by Rotherham-based company Metalysis (originally a spin-out of Cambridge University), creates titanium powder at much lower cost than the conventional method of atomising blocks of metal, said Prof Iain Todd, director of the university’s Mercury Centre in the department of materials.

This means automotive parts can be made more economically using additive manufacturing rather than traditional subtractive techniques that waste large amounts of the expensive metal and use costly die set tools, he told The Engineer. 

‘If you wanted to make anything out of titanium you normally wouldn’t bother because it’s not a commodity metal. But also the process is getting a lot quicker. It’s certainly a lot better for moderate runs - it used to be very low-volume production runs.’

Todd’s team has used the material to 3D print parts including impellers and turbochargers, as well as aerofoils, using a Renishaw laser additive manufacturing machine and standard operating procedures based on the material’s thermal characteristics.

‘It processes beautifully,’ he said. ‘It’s probably one of the easiest materials we’ve ever put on.’

The research doesn’t take titanium automotive printing to the point where the material or the technique could be commonly used for mass production. But Todd is confident things are moving towards that.

‘Each time we change something we move closer to the point where titanium could be considered like something as stainless steel,’ he said.

‘That’s still a high-value steel but you’re looking that costs the same, is about half the density and has temperature capabilities that are quite attractive I think you’re looking at an interesting competitor to standard automotive material.’

The researchers now plan to work with Metalysis to create other materials from the titanium powder, particularly alloys that would normally separate when formed from conventional titanium.


Readers' comments (7)

  • This is great news for the engineering component manufacturers and also watch manufacturers who use titanium - it is an inert material so ideal for skin contact. I look forward to seeing the potential for this method of manufacturing titanium components!

    Unsuitable or offensive? Report this comment

  • Great news indeed. This is a great advance and after listening to a program about Graphene this morning we really need to keep the lead we gain in R&D in these fielsds right through to commercialisation and manufacturing.

    Unsuitable or offensive? Report this comment

  • How soon until printing titanium gun components?

    Unsuitable or offensive? Report this comment

  • Why would you make a gun from titanium?

  • Producing from sand?

    Unsuitable or offensive? Report this comment

  • Certain beach sands contain rutile, which is primarily composed of titanium dioxide.

  • This is very interesting. Titanium is a high value metal and has been double the price of stainless when comparing low-cost titanium with very high performance stainless. This gap grows as the higher performance titanium alloys and low cost stainless steels as compared. I would like to see what the mechanical properties of this titanium material was. I am also interested in the size and cost of the parts that they can manufacture, taking into account the cost of the equipment as well.

    Unsuitable or offensive? Report this comment

  • Editor- you make gun components- but likely NOT the barrel out of titanium because it has a superb strength to weight ratio, even better when you look at fatigue, and is fantastic for fabrications. Being light, it has a valuable contribution to make in high rate of fire weapons or any cyclic mechanism.

    How many reasons to you need ?

    Unsuitable or offensive? Report this comment

  • You can already order custom made titanium parts for cheap at many different companies like http://www.bbaertschi.com . 3D printing technology will need to get cheaper before it's worth buying.

    Unsuitable or offensive? Report this comment

Have your say

Mandatory
Mandatory
Mandatory
Mandatory

My saved stories (Empty)

You have no saved stories

Save this article