Saturday, 30 August 2014
masthead+quote+image
Advanced search

Catalyst converts inert carbon dioxide into reactive carbon monoxide

Researchers at the University of Delaware have developed a catalyst capable of electrochemically converting carbon dioxide to carbon monoxide with 92 per cent efficiency. 

The carbon monoxide then can be used to develop useful chemicals.

‘Converting carbon dioxide to useful chemicals in a selective and efficient way remains a major challenge in renewable and sustainable energy research,’ said Feng Jiao, assistant professor of chemical and biomolecular engineering and the project’s lead researcher.

The Delaware team have reported their findings in Nature Communications. Co-authors include Qi Lu, a postdoctoral fellow, and Jonathan Rosen, a graduate student, working with Jiao.

The researchers found that a nano-porous silver electrocatalyst was 3,000 times more active than polycrystalline silver, a catalyst commonly used in converting carbon dioxide to useful chemicals. 

Silver is considered a promising material for a carbon dioxide reduction catalyst because it offers high selectivity — approximately 81 per cent — and it costs less than other precious metal catalysts. Additionally, because it is inorganic, silver remains more stable under harsh catalytic environments.

The exceptionally high activity, Jiao said in a statement, is likely due to the UD-developed electrocatalyst’s extremely large and highly curved internal surface, which is approximately 150 times larger and 20 times intrinsically more active than polycrystalline silver. 

Jiao said that the active sites on the curved internal surface required a much smaller than expected voltage to overcome the activation energy barrier needed drive the reaction.

He said the resulting carbon monoxide can be used as an industry feedstock for producing synthetic fuels, while reducing industrial carbon dioxide emissions by as much as 40 per cent.

To validate their findings, the researchers compared the UD-developed nano-porous silver catalyst with other potential carbon dioxide electrocatalysts including polycrystalline silver and other silver nanostructures such as nanoparticles and nanowires. 

Testing under identical conditions confirmed the non-porous silver catalyst’s significant advantages over other silver catalysts in water environments. 

Over the last 20 years, electrocatalytic carbon dioxide reduction has attracted attention because of the ability to use electricity from renewable energy sources such as wind, solar and wave. 

Jiao said it would be desirable to convert carbon dioxide produced in power plants, refineries and petrochemical plants to fuels or other chemicals through renewable energy use.

‘Selective conversion of carbon dioxide to carbon monoxide is a promising route for clean energy but it is a technically difficult process to accomplish,’ said Jiao. ‘We’re hopeful that the catalyst we’ve developed can pave the way toward future advances in this area.’


Readers' comments (2)

  • typo: Testing under identical conditions confirmed the non-porous silver...

    "nano-porous" instead?

    Unsuitable or offensive? Report this comment

  • Useful looking research. It now remains to ascertain whether this converter is scalable, long lasting and economic.

    Unsuitable or offensive? Report this comment

Have your say

Mandatory
Mandatory
Mandatory
Mandatory

My saved stories (Empty)

You have no saved stories

Save this article