A one-step method to grow and transfer high-quality graphene on silicon and other stiff substrates has been developed in Singapore.
The development, from a team of researchers at the National University of Singapore (NUS), led by Prof Loh Kian Ping, could lead to the use of graphene in high-value applications that are currently not technologically feasible.
This breakthrough, inspired by how beetles and tree frogs keep their feet attached to submerged leaves, is claimed to be the first published technique that accomplishes the growth and transfer steps of graphene on a silicon wafer.
This technique enables the technological application of graphene in photonics and electronics, for devices such as optoelectronic modulators, transistors, on-chip biosensors and tunnelling barriers.
The innovation was first published online in Nature.
Graphene has favourable electronic, optical and mechanical properties, as well as its use as transparent conductive films for touch screen panels of electrodes. The production of high quality wafer-scale graphene films is beset by many challenges, among which is the absence of a technique to grow and transfer graphene with minimal defects for use in semiconductor industries.
In a statement, Prof Loh said: ‘Although there are many potential applications for flexible graphene, it must be remembered that to date, most semiconductors operate on “stiff” substrates such as silicon and quartz.’
‘The direct growth of graphene film on silicon wafer is useful for enabling multiple optoelectronic applications, but current research efforts remain grounded at the proof-of-concept stage. A transfer method serving this market segment is definitely needed, and has been neglected in the hype for flexible devices.’
To address the current technological gap, the NUS team led by Prof Loh drew their cues from how beetles and tree frogs keep their feet attached to fully submerged leaves, and developed a process called face-to-face transfer.
Dr Gao Libo, the first author of the paper and a researcher with the Graphene Research Centre at NUS Faculty of Science, grew graphene on a copper catalyst layer coating a silicon substrate.
After growth, the copper is etched away while the graphene is held in place by bubbles that form capillary bridges, similar to those seen around the feet of beetles and tree frogs attached to submerged leaves.
The capillary bridges help to keep the graphene on the silicon surface and prevent its delamination during the etching of the copper catalyst. The graphene then attaches to the silicon layer.
To facilitate the formation of capillary bridges, a pre-treatment step involving the injection of gases into the wafer was applied by Dr Gao. This helps to modify the properties of the interface and facilitates the formation of capillary bridges during the infiltration of a catalyst-removal liquid. The co-addition of surfactant helps to iron out any folds and creases that may be created during the transfer process.
This novel technique of growing graphene directly on silicon wafers and other stiff substrates will be very useful for the development of rapidly emerging graphene-on-silicon platforms, which have shown a promising range of applications.
The “face-to-face transfer” method developed by the NUS team is also said to be suitable to batch-processed semiconductor production lines, such as the fabrication of large-scale integrated circuits on silicon wafers.