Friday, 28 November 2014
Advanced search

Liquid metal pump boost for microfluidics

RMIT University researchers in Melbourne, Australia, have developed a micro-scale liquid metal enabled pump with no mechanical parts.

According to the university, the design will enable micro-fluidics and lab-on-a-chip technology to finally realise their potential, with applications ranging from biomedicine to biofuels.

The research has been published in Proceedings of the National Academy of Sciences (PNAS).

Source: RMIT University

With no moving parts, the new pump design is expected to greatly enhance the capabilities of micro-fluidics and lab-on-a-chip technologies

Lead investigator Dr Khashayar Khoshmanesh, a Research Fellow in the Centre for Advanced Electronics and Sensors at RMIT, said currently there was no easy way to drive liquid around a fluidic chip in micro-fabricated systems.

‘Lab-on-a-chip systems hold great promise for applications such as biosensing and blood analysis but they currently rely on cumbersome, large-scale external pumps, which significantly limit design possibilities,’ he said in a statement.

‘Our unique pump enabled by a single droplet of liquid metal can be easily integrated into a micro device, has no mechanical parts and is both energy efficient and easy to produce or replace.

‘Integrated micro-fluidics has the potential to revolutionise the way we process chemicals and manipulate bio-particles at the micro-scale.

‘This innovation shows that micro- and nanoscale pumping can be accomplished with a simple system – a crucial advance for the field of micro-fluidics.’

The design uses droplets of Galinstan – a non-toxic liquid metal alloy comprised of gallium, indium and tin – as the core of a pumping system to induce flows of liquid in looped channels.

When the alloy is activated by applying a voltage, the charge distribution along the surface is altered. This propels the surrounding liquid without moving the Galinstan droplet through the loop, using a process called continuous electrowetting.

The pump is said to be highly controllable, with the flow rate adjusted by altering the frequency, magnitude and waveform of the applied signal. The flow direction can also be changed by reversing the polarity of the applied voltage.


Have your say

Mandatory
Mandatory
Mandatory
Mandatory

My saved stories (Empty)

You have no saved stories

Save this article