Thursday, 31 July 2014
Advanced search

Technology could monitor hip replacements for signs of wear

A new device could monitor hip replacements for signs of wear, powered only by the movement of the user’s walk.

The technology, designed to fit inside a typical prosthetic hip joint, uses a piezo-electric device that generates up to 3.7V of electricity as the user walks to power a strain gauge and a transmitter.

By using the strain gauge to monitor the distance between the prosthesis and the femur leg bone, doctors will able to tell if the replacement is starting to break down and advise the patient on lifestyle changes or the potential need for another operation.

‘Thirty per cent of hip replacements within six years start to show signs of osteolysis,’ said Brunel University student Luke Kavanagh, who developed the device.

‘As the joint comes loose it starts to work away at the plastic cement and these little particles then travel around the body and can actually start to corrode the rest of the femur and the hip.’

The device contains a ball bearing that rolls back and forth as the user walks along and strikes a substrate covered on one side with piezo-electric material (known as a unimorph) to produce electricity.

Kavanagh said the challenge was adjusting the rigidity of the unimorph so that it bent enough to produce sufficient power but was durable enough to survive this repetitive process.

He added that the device could be customised to adjust its output and durability depending on how active the user was.

‘An older person isn’t going to move with any real vigour, so you could put a much thinner unimorph in and get all the electricity from big deflections,’ Kavanagh said.

‘With a young person who’s going to be running around, you can put a much thicker one in, but because the velocity you’re hitting the unimorphs with is going to be so much greater you’d get the electricity you need either way.’

Readers' comments (1)

  • Rather interesting and worthwhile. Planning to publicise the study?

    Unsuitable or offensive? Report this comment

Have your say


Related images

My saved stories (Empty)

You have no saved stories

Save this article

Digital Edition

The Engineer July Digi Issue


London Mayor Boris Johnson is lobbying for a £10 additional charge for diesel cars to drive into Central London by 2020, and for road tax on diesel cars and all pre-2006 cars to be increased, to counter air pollution. What option most closely matches your opinion on this?

Previous Poll

Europe's largest tidal array in the Pentand Firth off Orkney will eventually generate up to 86MW of power. What will it take for tidal energy to make an appreciable contribution to the UK's energy needs?

Read and comment on the results here