Sunday, 20 April 2014
masthead+quote+image
Advanced search

Blanket for batteries

Researchers in the US are devising a "blanket" that will enable them to utilise as much electricity as possible from nuclear-powered batteries the size of a grain of salt.

Engineering physics researchers at the University of Wisconsin-Madison are devising a unique "blanket" that will enable them to squeeze as much electricity as possible from nuclear-powered batteries the size of a grain of coarse salt.

Such batteries, which exploit the natural decay of radioisotopes to generate electricity, could provide virtually indefinite power for micro-technologies like small robots for military applications or sensors that monitor a building's health.

Other technologies such as fuel cells, chemical batteries or turbine generators also might work in micro-scale applications, said Professor James Blanchard. ‘But all of them are short-lived,’ he said. ‘They either need to be recharged or refuelled. Our niche is things that need to be placed and ignored, and just keep running for years.’

Nuclear microbatteries convert heat or energy to electricity more efficiently when they are hot, so it makes sense to insulate them, said Blanchard. ‘The better the insulation, the hotter the source gets, so the more efficient the battery can be,’ he said.

However, insulating a millimetre-square battery in a way that minimizes heat loss is no easy task. Multifoil insulation is an effective macro-level insulator that combines several thin layers of foil each separated by a vacuum. ‘They work because they're radiating heat from one layer to another, as opposed to conducting heat through a solid,’ said Blanchard.

For the microscale, however, multifoil insulation is far too thick.

So, capitalising on the layered concept, which reduces heat radiation for a fixed temperature drop, Blanchard and graduate student Rui Yao decided to sandwich semicircular silicon oxide pillars, which are poor conductors, between very thin silicon sheets.

‘You want as little conduction through these pillars as possible,’ said Blanchard.

They developed computer models to study the heat radiation and conduction of their microscale insulation. And, using Wisconsin Center for Applied Microelectronics clean room facilities, Yao constructed silicon prototypes.

He now is experimentally verifying what his computer models suggest-that heat is radiating through the silicon layers without much heat loss. ‘The prototypes he built are a little thicker than the ones we ultimately want to get, but they're consistent with his models,’ said Blanchard.

Funded by a three-year, $300,000 US Department of Energy grant and inspired by an earlier collaboration with Sandia National Laboratory researchers, Blanchard and Yao are still testing and refining the insulation. Implementation for this promising technology, they say, is a couple of years down the road.

‘It looks like we'll have an effective insulator that's better than any solid-and better, even, than some of the multi-foil insulations that you can buy commercially,’ said Blanchard.

Have your say

Mandatory
Mandatory
Mandatory
Mandatory

My saved stories (Empty)

You have no saved stories

Save this article

Digital Edition

The Engineer March Digital Issue

Poll

The roundtable feature in our current issue looks at issues surrounding graduate recruitment into engineering. Which of the solutions proposed in the feature would make the biggest contribution to boosting the number of graduates finding jobs in engineering and remaining there?

Previous Poll

Europe's largest tidal array in the Pentand Firth off Orkney will eventually generate up to 86MW of power. What will it take for tidal energy to make an appreciable contribution to the UK's energy needs?

Read and comment on the results here