Wednesday, 26 November 2014
Advanced search

Huddersfield team to keep Tram-Train vehicles on track

Under contract by Network Rail, engineers at Huddersfield University’s Institute of Railway Research (IRR) are working on a project to overcome track-related difficulties encountered when operating Tram-Train vehicles on tram lines and rail networks.

The Tram-Train concept allows a railway vehicle to run in two operational modes; as an on-street tram serving city centres and as a commuter train running on existing local rail network.  This dual operation concept provides great flexibility and efficient use of railway infrastructure and connections.   

The Sheffield-Rotherham Tram-Train scheme represents the UK’s first trial of the concept and has provided the project partners, the Department for Transport, Network Rail (NR), Northern Rail, Stagecoach Supertram (SST) and South Yorkshire Passenger Transport Executive with a number challenges.

Dr Paul Allen, assistant director of the IRR and project manager, said: ‘One of these challenges is the wheel-rail interface, key to the vehicles’ safe operation and a major driver for the ongoing life-cycle maintenance costs of the system.’

By applying advanced computer modelling techniques, the team at the IRR has been able to predict vehicle dynamic behaviour on the tight radius curves (<25m) of embedded city centre track and also the higher speed but less curvaceous sections on Network Rail mainline. 

‘These differing conditions require an interface design which maintains vehicle dynamic stability on straight track, whilst allowing adequate curving performance and derailment resistance in the city centre – a classic engineering compromise in railway vehicle dynamics,’ Dr Allen said in a statement. 

David Crosbee, a Senior Research Fellow in the IRR Tram-Train project team member said: ‘The wheel design work was complicated by the very different rail head shapes of the two systems; the SST network having a very flat rail head profile, whilst the worn NR rail sections typically have a much smaller effective rail head shape.

‘This necessitated compromise in the wheel and tread design with significant simulation work being carried out to optimise the new wheel profile shape. This allowed wheel-rail contact stress and wear rates to be minimised on both systems, whilst also maintaining safety against derailment.’

The wheel profile was also required to operate under differing wheelset geometry conditions, requiring a special stepped-wheel flangeback to maintain safe passage through NR and SST switches and crossings and checked curves. 

The new profile will now be subject to inspection by the SST project team and the Rail Safety and Standards Board (RSSB). Tram test running will begin once the new wheel profile is approved for running on the mainline.


Readers' comments (1)

  • Chicago North Shore and Milwaukee Railway had the "Electroliner" in 1941 that managed to run to this spec. 85 mph and a tram pole collector to boot!!
    Even had a bar - bet these don't.

    Unsuitable or offensive? Report this comment

Have your say

Mandatory
Mandatory
Mandatory
Mandatory

My saved stories (Empty)

You have no saved stories

Save this article