Lithium-ion battery can be painted onto most surfaces
A lithium-ion battery that can be painted onto virtually any surface has been developed at Rice University.
According to a statement, the rechargeable battery created in the lab of Rice materials scientist Pulickel Ajayan consists of spray-painted layers, each representing the components in a traditional battery. The research appears in Nature’s online, open-access journal Scientific Reports.
Lead author Neelam Singh, a Rice graduate student, and her team experimented with the formulation, mixing and testing of paints for each of the five layered components, namely two current collectors, a cathode, an anode and a polymer separator in the middle.
The materials were airbrushed onto ceramic bathroom tiles, flexible polymers, glass, stainless steel and a beer stein to see how well they would bond with each substrate.
In the first experiment, nine bathroom-tile-based batteries were connected in parallel. One was topped with a solar cell that converted power from a white laboratory light. When fully charged by both the solar panel and the house current, the batteries alone powered a set of light-emitting diodes that spelled out ‘RICE’ for six hours.
The researchers reported that the hand-painted batteries were consistent in their capacities, within ±10 per cent of the target. They were also put through 60 charge-discharge cycles with only a very small drop in capacity, Singh said.
The first layer, the positive current collector, is a mixture of purified single-wall carbon nanotubes with carbon black particles dispersed in N-methylpyrrolidone. The second is the cathode, which contains lithium cobalt oxide, carbon and ultrafine graphite (UFG) powder in a binder solution. The third is the polymer separator paint of Kynar Flex resin, PMMA and silicon dioxide dispersed in a solvent mixture. The fourth, the anode, is a mixture of lithium titanium oxide and UFG in a binder, and the final layer is the negative current collector, a commercially available conductive copper paint, diluted with ethanol.
‘The hardest part was achieving mechanical stability, and the separator played a critical role,’ said Singh. ‘We found that the nanotube and the cathode layers were sticking very well, but if the separator was not mechanically stable they would peel off the substrate. Adding PMMA gave the right adhesion to the separator.’ Once painted, the tiles and other items were infused with the electrolyte and then heat-sealed and charged.
Singh said the batteries were easily charged with a small solar cell. She foresees the possibility of integrating paintable batteries with recently reported paintable solar cells to create an energy-harvesting combination.
As good as the hand-painted batteries are, she said, scaling up with modern methods will improve them by leaps and bounds. ‘Spray painting is already an industrial process, so it would be very easy to incorporate this into industry,’ Singh said.
The Rice researchers have filed for a patent on the technique, which they will continue to refine. Singh said they are actively looking for electrolytes that would make it easier to create painted batteries in the open air, and they also envision their batteries as snap-together tiles that can be configured in any number of ways.