According to a statement, the devices, shown to be capable of responding with high precision to the stresses and strains associated with touch and finger movement, are a step towards the creation of surgical gloves for use in medical procedures such as local ablations and ultrasound scans.
Researchers from the University of Illinois at Urbana-Champaign, Northwestern University and Dalian University of Technology have published their study today, 10 August, in IOP Publishing’s journal Nanotechnology.
Offering guidelines to the creation of these electrotactile stimulation devices for use on surgeons’ fingertips, their paper is said to describe the materials, fabrication strategies and device designs using ultra-thin, stretchable, silicon-based electronics and soft sensors that can be mounted onto an artificial ‘skin’ and fitted to fingertips.
‘Imagine the ability to sense the electrical properties of tissue and then locally remove that tissue, precisely by local ablation, all via the fingertips using smart surgical gloves. Alternatively, or perhaps in addition, ultrasound imaging could be possible,’ said co-author of the study Prof John Rogers.
The researchers suggest that the new technology could open up possibilities for surgical robots that can interact, in a soft contacting mode, with their surroundings through touch.
The electronic circuit on the ‘skin’ is made of patterns of gold conductive lines and ultra-thin sheets of silicon, integrated onto polyimide. The sheet is then etched into an open-mesh geometry and transferred to a thin sheet of silicone rubber moulded into the precise shape of a finger.
This electronic ‘skin’, or finger cuff, was designed to measure the stresses and strains at the fingertip by measuring the change in capacitance of pairs of microelectrodes in the circuit. Applied forces decreased the spacing in the skin, which in turn increased the capacitance.
The fingertip device could also be fitted with sensors for measuring motion and temperature, with small-scale heaters as actuators for ablation and other related operations.
The researchers experimented with having the electronics on the inside of the device, in contact with wearer’s skin, and also on the outside. They believe that, because the device exploits materials and fabrication techniques adopted from the established semiconductor industry, the processes can be scaled for realistic use at reasonable cost.
‘Perhaps the most important result is that we are able to incorporate multifunctional silicon semiconductor device technologies into the form of soft, three-dimensional, form-fitting skins, suitable for integration not only with the fingertips but also other parts of the body,’ said Rogers.
The researchers now intend to create a ‘skin’ for integration on other parts of the body, such as the heart. In this case, a device would envelop the entire 3D surface of the heart to provide various sensing and actuating functions, providing advanced surgical and diagnostic devices relevant to cardiac arrhythmias.
Future challenges include creating materials and schemes to provide the device with wireless data and power.
Swiss geoengineering start-up targets methane removal
Several rather dubious statistics in this report. IF methane had 120× the thermal effect of CO2 that would be TWO orders of magnitude. Two is not...