Researchers at the University of Surrey are developing a new kind of biosensor which can determine in minutes if a patient’s blood contains a particular compound, for example paracetamol. Currently this type of examination needs to be carried out in a laboratory, which is expensive and time consuming.
The research is being carried out by a team at the University led by Dr Sub Reddy with funding from the Swindon based Engineering and Physical Sciences Research Council.
The sensor system can return a response in less than 10 minutes compared to the 2 to 3 hours required by a routine laboratory, depending on their workload. ‘Our sensor is portable and will be easy to use even by unskilled staff,’ says Dr. Reddy. ‘Ideally, the sensor can be located in an ambulance so that a result is available when the patient arrives at hospital.’
The paracetamol sensor is the pilot to the development of an array of overdose sensors, which will test for alcohol and anti-depressants as well.
The team has also successfully used the system to detect glucose, says Dr Reddy, and is also investigating the detection of creatinine, a product in the body, which is an indicator of kidney dysfunction.
The heart of the biosensor consists of a disc-shaped quartz crystal, around a centimetre in diameter and 0.2 mm thick. ‘When an alternating electric field is applied the crystal vibrates from side to side, like a nano-scale earthquake,’ says Dr Reddy. ‘It shakes ten million times a second with an amplitude of a fraction of a nanometre.’ The crystal can continue to oscillate even when immersed in a liquid. Anything which then sticks to the crystal surface or which affects the viscosity or elasticity of any attached film at the surface will affect the frequency at which the crystal vibrates.
The concept of the sensor is to have a small reaction chamber above the surface of the crystal. When a sample – blood, say – is placed in the chamber a series of carefully designed chemical reactions can be made to occur which result in a molecule of interest – for example cholesterol – contributing to the formation of a solid product. The product then attaches to the surface of the crystal, affecting the frequency of its oscillation.
Because the chemical reaction can be made to be highly specific to the molecule of interest so that only one solid product is formed, other substances in the sample will not interfere with the process or provide spurious readings.
Dr. Reddy explained how the biosensor has been used to detect glucose. ‘First, you add a sample to the reaction mixture. An enzyme then oxidises the glucose to form hydrogen peroxide. This in turn is acted upon by a second enzyme and reacts with other ingredients in the mixture to form a water repelling molecule, which comes out of solution and can be made to attach to the quartz. This causes a change in the oscillation frequency which can be correlated with the quantity of product, which can in turn be related to the amount of glucose originally present in the sample.’
The researchers are now looking into ways of refining the system, by using membranes above the surface, which are selective for specific types of molecule, for example. This would ‘filter out’ any potentially contaminating species to provide a much cleaner and unambiguous reading.
‘We are building up a portfolio of detection strategies for compounds of interest and we are now reaching the stage where we are looking for industrial collaborators. We are also applying this viscoelastic sensor to lab-on-a-chip type technologies, as well as integrating it with synthetic polymer films capable of molecular recognition,’ says Dr Reddy.