Optimised for industrial control

Vishay Intertechnology recently released the new MP series of precision thin film resistor divider networks, the first devices to offer 0.05% resistance ratio tolerance in the SC-70 package.

Vishay Intertechnology recently announced the release of the new MP series of precision thin film resistor divider networks. Vishay says they are the first such devices to offer 0.05% resistance ratio tolerance in the ultra-small SC-70 package.

Intended for use in instrumentation amplifiers, precision voltage dividers, and bridge network circuitry, the surface-mount devices in the Vishay Thin Film MP series are optimised for industrial control systems, handheld instruments such as portable measuring devices for diagnostics, and other end systems requiring precision resistor pairs with exceptionally small dimensions.

These off-the-shelf solutions are said to provide precision tolerances down to 0.05% in the industry’s smallest standard package, offering high performance while requiring little board space. As the first divider resistors to combine such small size with such low ratio tolerance, these products provide an alternative to larger-format devices packaged in the SOT-23 or SOT-143 case sizes.

New MP devices are available as isolated matched-pair or centre-tapped resistor divider networks in 3-lead (MP3) or 4-lead (MP4) standard moulded SC-70 packages with maximum dimensions of 2.200mm by 1.350mm and a height of 1.100mm.

The new networks feature low TCR (temperature coefficient ratio) tracking of +/-2ppm/degrees C, and their standard SC-70 package format provides common standard resistance values ranging from 1 kilohm to 10 kilohms per resistor, thereby simplifying component selection for designers. Custom designs are available for applications requiring non-standard ratios.

Each network is specified for a TCR value of +/-25 ppm/degrees C and a power rating of 0.075W per resistor or 0.150W for the package. A TAMELOX (passivated nichrome) resistive layer enhances stability. Long-term stability is rated for 500ppm at 70 degrees C for 2,000 hours, and shelf-life stability specified at less than 100ppm at 25 degrees C for one year. The devices’ operating temperature range is -55 degrees C to +125 degrees C.

Samples and production quantities of the new devices are available now, with a lead time of eight weeks for larger orders.

On the web