Product Details Supplier Info More products

Over GBP25,000 of energy costs per year are being saved by an asphalt production plant following the fitting of ABB variable speed drives.

Express Asphalt, a subsidiary of Aggregate Industries, produces 40,000 tonnes of asphalt a year at its depot in Darwen, near Blackburn, Lancashire – mainly for local authorities and utility contractors.

The asphalt production process involves a burner supplying heat to an aggregate dryer in the form of a rotating drum.

The dryer dries the aggregate at a temperature of 150C – a process that creates steam and dust.

These are extracted by an exhaust fan, with the dust captured in filter bags for reuse.

Because the 90kW fan was run at full speed with its output damped, it was wasting a lot of energy.

‘The dryer exhaust fan effectively creates a pressure to draw the steam and dust out but, because the motor was running at 50Hz constantly, it was doing too much work,’ said Rick Harbour, works manager with Express Asphalt.

The company asked Rick Hinde of Invertech Solutions to look at ways of controlling the exhaust fan with a variable speed drive.

Steve Smith of Beta Power supplied a 110kW ABB standard drive for the fan.

‘The fan had its damper placed in the fully open position and the dryer pressure was then controlled via a pressure transmitter feeding a signal back to the ABB drive,’ Hinde explained.

Invertech Solutions went on to install a 30kW ABB drive to the dryer.

‘The burner uses kerosene and we found that running the drive at 55Hz gives the optimum drum rotation speed for drying,’ said Hinde.

This meant we used half a litre per tonne less of kerosene than before, saving Express Asphalt GBP8,000 per annum in burner fuel costs.

When they are not drying aggregate, the drive ramps right down to a low speed.

This led to savings of GBP500 a month in the cost of electricity to run the exhaust fan, cutting energy use from 20kW per tonne of asphalt produced to between 4 and 5kW.

Together with other ABB variable speed drives on the bitumen pump, the rotating dryer, the hot stone elevator, the mixer and the batch elevator, as well as other energy saving components such as timers, the plant is saving a total of GBP1,500 a month on its electrical energy costs.

Together with the reduction in burner costs of over GBP600 a month, this is a total energy cost reduction of around GBP2,100 a month, or GBP25,200 a year.

Other benefits include a 5dB reduction in noise in the asphalt drying area, as well as reduced wear and tear.

ABB Automation Tech – Drives and Motors

View full profile