Product Details Supplier Info More products

Wichita Clutch, an Altra Industrial Motion company, has improved the operation of marine-duty water-cooled clutches and brakes used for tensioning on offshore oil and gas platforms.

This is due to a new composite water jacket design that enables Wichita’s Aquamakks clutches and brakes to be cooled with salt water or water with high acidic PH levels.

Prior to its development, the industry standard was to use cast-iron water jackets, alternating with copper wear plates, to dissipate the high heat generated in heavy-duty tensioning applications.

In marine environments, however, salt corrosion created maintenance issues that necessitated too-frequent repair or replacement of the cast-iron water jackets.

The composite material used in the new water jackets was developed by Wichita engineers working in conjunction with a partner firm.

Several polymer combinations were tested before selection of the high-tech blend that satisfied the essential design requirement: which was to be as strong as the original iron parts and match their typical design stresses.

In the event, structural testing couldn’t cause a failure in the Aquamakk’s 36in-diameter composite water jacket, even when the part was stressed to more than four times its maximum design load.

Further testing to determine the longevity of the composite jackets has been ongoing for two years at Wichita’s engineering test lab.

This has proven that the composite water jackets are at least as long-lived as the cast-iron jackets, while also providing corrosion resistance in offshore applications.

In addition to material selection, the most difficult technical challenge in redesigning the Aquamakks was to design the water porting in and out of the composite water jacket.

Initially, because composite materials can be moulded into threads, it was thought the water porting could be built into the base material; however, this configuration failed to offer the robustness required in the industry.

Finally, Wichita engineers achieved the necessary robustness by designing metal threads (male and female), which are moulded into the composite material.

While patents are pending for the use of the composite materials, patents have already been issued for the water-flow configuration, which is the performance heart of the Wichita Clutch water jacket.

‘The patented water jacket flow design provides a balanced water flow in the water jacket to efficiently remove heat being generated by the friction materials running against the copper alloy,’ said Mark Stuebe, vice president and general manager, Altra Heavy Duty Clutch Brake Group.

‘The balanced flow is designed to match the heat being generated on a swept area in a multi-plate – what this means to a user is that a Wichita water-cooled unit can absorb more heat than a comparable competitive unit when it’s supplied with sufficient cooling water,’ he added Also, since the composite material is a thermal insulator, the cooling water moving through the composite water jacket picks up more of the frictional heat compared with an iron water jacket.

Thus, the surrounding parts in a unit remain at cooler temperature, which contributes to longer life.

As well as their anti-corrosion benefits, the Composite water jackets offer an additional benefit of weight reduction, with some units weighing at least 50 per cent less than the iron jackets.

For example, the 36in Aquamakks cast-iron water jacket weighs 375lbs, while the composite water jacket weighs 90-96lbs.

This is significant in the multi-plate (friction disc) design, in which each of the copper friction discs requires two water jackets – one on each side of the disc.

Depending on the braking/holding requirement of the application, some units may have up to four discs and eight water jackets.

On the large 36in-diameter units, the copper plates themselves may be 3/8in thick and weigh 1,140lbs.

Thus, on a unit with four discs and eight water jackets, the total weight of discs and cast-iron jackets can reach nearly 3,500lbs.

With composite water jackets, discs and jackets on the same unit weigh less than 1,200lbs.

Offered in three diameter sizes – 19, 25 and 36in (friction lining OD) – the Aquamakks provides up to 3,400HP heat absorption, which is 35 per cent higher than the most robust units previously constructed for heavy-duty applications.

To date, Aquamakks units with new composite water jackets have been supplied in 25 and 36in sizes to Oil States Industries (Skagit-Smatco) and National Oilwell Varco’s Amclyde Division, for offshore mooring and positioning applications.

They have also been installed in oil and gas draw works applications.

Altra Industrial Motion

View full profile