Product Details Supplier Info More products

System Control Solutions has introduced Delta Electronics’ Cliq DC power supply for harsh industrial environments.

The product offers a nominal output voltage of 24V, a wide temperature range from -20C to +75C and a minimum holdup time of 20ms.

The Cliq is housed in a rigged, ultra-compact case that is shock and vibration resistant according to IEC 60068-2.

The power supply provides overvoltage, overload and thermal protection.

The input voltage ranges from 85 to 264V AC (one phase) and 320-575V AC (three phase).

The multiple terminals allow fast wiring and easy installation.

The Cliq power supply offers overload protection (OLP/OCP) to prevent damage resulting from overcurrent.

When the rated current is higher than 150 per cent, the output voltage starts to drop automatically.

When the power exceeds the maximum limit and reaches UVLO (under voltage point), the power supply will enter the bouncing mode.

Once the overload is eliminated, the output voltage will return to its normal volume.

When error occurs in the feedback device inside the power supply, the overvoltage protection (OVP) will force the power supply to enter level-two output (30 ~ 32V DC) and the output voltage will be lower than 35V.

After the error is eliminated, the output voltage will restore to 24V automatically.

When short circuit occurs at the output voltage terminal, the short-circuit protection will force the power supply to enter the bouncing mode until the fault is eliminated.

When the overcurrent or overvoltage persists for a period of time and causes high temperature, the thermal protection will force the power supply to enter the bouncing mode until the fault is eliminated.

The output voltage is 24V DC, which can be adjusted from 22 to 28V DC on the ‘potentiometer-adjust’ on the front panel of each power supply.

System Control Solutions

View full profile