Product Details Supplier Info More products

Micro-Epilson has introduced a range of sensors, including the EddyNCDT 3100 displacement sensor that uses proprietary Embedded Coil Technology (ECT) and is suitable for harsh operating environments.

As with all ECT sensors, the EddyNCDT 3100 offers high mechanical robustness, resulting in longer service intervals and higher temperature stability.

The sensors are suitable for harsh operating environments, including high vibration, impact shocks and high operating temperatures.

The EddyNCDT 3100 has an integrated EEPROM chip that stores sensor and cable calibration data.

Normally, with eddy current sensors, the user has to spend time calibrating the sensor, controller and cable to the specific application.

However, with the EddyNCDT 3100, the sensor is simply plugged in to a controller and no further calibration is required.

This means reduced calibration and set up times for users, particularly if multiple sensors and controllers are involved.

The sensor controller also incorporates a web browser interface, enabling users to remotely configure individual or multiple sensor installations.

Ethernet and analogue interfaces are also provided.

The OptoNCDT 2300 is a high-end, self-contained laser displacement sensor that requires no separate controller and provides a high measuring speed of up to 50kHz.

The sensor is therefore suitable for high-speed dynamic applications such as vibration measurement or for measuring uneven, difficult surfaces including transparent plastics.

The OptoNCDT 2300 achieves high resolution and high measuring speeds without any averaging.

It can also be configured remotely using a web browser interface.

This direct connection means the user can store parameters for a particular application, which can then be uploaded to one or multiple sensors, reducing set up time considerably.

The Thermoimager TIM340 is an inline radiometric thermal imaging camera that is built on the same platform as its predecessor, the Thermoimager TIM160, but offers higher thermal resolution and a new detector.

It provides temperature images and profiles of a target area.

This plug-and-play unit comes with a full software package that enables the user to configure all the parameters of the device, as well as enabling the real-time capture (at up to 120Hz full frame rate) and storage of images or video of an event for slow-motion play back or snapshots at a later date.

The user is able to switch between a thermal image and a photo-realistic digital image.

The Thermoimager TIM340 is fixed into position in a production line or RandD lab in order to monitor the temperature profile of target materials or objects.

The camera is suitable for in-process measurement, quality control, RandD, and for locating hotspots on critical plant and machinery.

The Scancontrol 2710 series of sensors are very compact with an integrated controller, providing a complete tool for the measurement of angles, steps, position and part recognition.

Profiling of adhesive beads, weld seams, grooves and gaps is also possible.

After the sensor has been configured using the new Scancontrol Configuration Tools 2.0 software, the sensor can perform data acquisition, profile calculations and measured value generation at full resolution (100Hz).

The sensor is therefore suitable for robotics and automation tasks and is available in 25 and 100mm measuring ranges.

Micro-Epsilon

With over 45 years experience and more than 15,000 customers worldwide, Micro-Epsilon understands the need for accurate, robust, intelligent sensors and measurement systems.

With over 45 years experience and more than 15,000 customers worldwide, Micro-Epsilon understands the need for accurate, robust, intelligent sensors and measurement systems.

If you are measuring any type of displacement / position, temperature, speed or colour parameters, Micro-Epsilon sensors and systems provide market-leading performance, together with the fastest measuring rates, highest operating temperature ranges and smart interface capabilities. From simple, low cost sensors to high volume, customer-specific OEM solutions, Micro-Epsilon will have athe correct measurement solution for your application.

Using both contact and non-contact measurement techniques, Micro-Epsilon boasts one of the largest ranges of displacement sensors including 1D, 2D & 3D laser optical, confocal chromatic, eddy current, capacitive, inductive, draw-wire and time-of-flight technologies. Measuring ranges are from nanometers to kilometers!

For temperature measurement, there is a comprehensive range of non-contact infrared temperature sensors and thermal imaging cameras capable of measuring up to that include intelligent software packages to support configuration, analysis and management during the application. LED analysers, fibre optic sensors and Colour recognition sensors measure true colour using L*A*B and CIE.

Micro-Epsilon sensors are used throughout almost all industries: from automotive to aerospace, motorsport to metal production, semiconductor to subsea. Whether it’s an R&D, test, inspection, OEM or a process control application, Micro Epsilon measurement engineers can provide the right measurement solution.

View full profile