Product Details Supplier Info More products

The S10 and S17 Ammonium Sensors from Electro-Chemical Devices (ECD) consist of two universal sensors and replaceable electrode cartridges.

The S10 Sensor is an immersion or an insertion style sensor and the S17 is a valve retractable style sensor.

They are fully re-buildable and feature a 316 stainless-steel body that incorporates the sensing element, a temperature module and a signal conditioner with cabling.

Ammonium concentration is a commonly measured parameter in environmental water, potable water and waste water.

The pIon electrode cartridge measures the activity of ‘free’ Ammonium ions in solution in concentrations from 0.5 to 18,000ppm over a pH range from 2-10pH.

The pIon can measure Ammonium ions over a wide temperature range of 0 to 40C.

The S10 and S17 sensors utilise ECD’s replaceable electrode cartridges, which can be selected to measure pH, ORP, dissolved oxygen, conductivity and resistivity.

These cartridges provide specific solutions for demanding measurement requirements and are constructed in a variety of configurations and materials to support diverse industries.

The application specific sensor cartridges utilise construction materials that are selected for long life and accuracy.

The S10 and S17 Sensors can be integrated with ECD’s C22 Analyzer to provide automatic pH compensation for a total Ammonia measurement system.

The C22 Analyzer features ECD’s advanced Multi-Bus architecture.

The Multi-Bus design enables customization of up to four inputs and six outputs in a 1/2 DIN NEMA 4X enclosure.

Channel comparisons or measurement compensation, configurable conductivity concentration curves, the graphical display of data and PID control on the outputs or up to eight optional SPDT relays are just a few of the powerful features in this easy to use instrument.

The S10 Sensor is designed with a 0.75in MNPT compression fitting as the process connection.

This construction feature allows a variable insertion length to accommodate installation in pipe tees, flow cells or through tank walls.

If the trunk fitting is reversed, the sensor can be installed in a pipe for submersion in a tank.

S17 Retractable Sensor The S17 Sensor is designed with a 1in MNPT ball valve, a 1 x 0.75in reducer and a 0.75in MNPT compression fitting to provide the process connection.

Loosening the compression fitting allows the sensor to side freely through the ball valve for insertion either into the process or retraction from the process.

Once the sensor is retracted, the ball valve can be closed and the sensor can be removed for maintenance or replacement without shutting down the process line.

Electro-Chemical Devices

View full profile