Product Details Supplier Info More products

Cleaning solvents are used in many industries to remove dirt, oil, grease, or other contaminants from machined and fabricated metal, plastic and composite surfaces. Due consideration must be given to the effects on users and the environment.  Some of the benefits of using  Clarea® solvents for these applications are discussed in this article.

Solvents used for cleaning must be highly refined and leave no residues on drying. They have to be very effective in removal of oils and soils without causing damage or corrosion of the parts or components being cleaned and leave minimal residues which will be the result of process design. Cleaning to remove process oils and particles can use single or multitank spray washers or immersion tanks with ultrasonics or agitation depending on the volume of components and cleaning specifications. These vary widely from very demanding automotive and aerospace applications to less demanding applications where critical cleaning is not a requirement.

Pre-used parts or assemblies from the transportation, aerospace or manufacturing equipment sectors are often very heavily contaminated when removed from service but must be free of these oils, soils, grease, dirt and contaminants before handling to disassemble prior to refurbishing and rebuilding. Much of this work will be manual and the considerations for the safety of operators, hand wiping or brush cleaning is paramount. Provision of personal protection equipment (PPE) such as gloves, overalls, safety glasses and possibly masks must be carefully considered to be sure the PPEs are compatible with the solvents.

Among other considerations are the working space where the cleaning applications are to be carried out. Flammability versus drying time is always an issue. It is preferable to use a slower drying high flash point solvent in enclosed areas. Good ventilation with a high extraction rate of air will assist drying. In enclosed machines with automatic handling a positive extraction rate of air and heated and extracted final tank can lower process times. Flame proofing requirements and the insurance implications of the faster drying times of more volatile flammable solvents is often mitigated by the use of less volatile, lower VOC materials by design of machines and careful consideration of costs which these solvents offer in lower usage and longer tank life with much lower disposal costs of used materials.

The growing concerns regarding environmental and health hazards of the most commonly used chlorinated solvents for industrial degreasing and cleaning has led to the formulation by EnviroTech Surface Technologies  of the Clarea® range of safer cleaning solvents.

Clarea® solvents can be used for spray or immersion cleaning for very heavy soiling or in multitank processes to meet the highest standards demanded for critical cleaning. They can be used as wipe or brush cleaners for large surface areas prior to painting or powder coating.

Why should you choose Clarea® industrial cleaning solvents.
The solvents applied during production or finishing processes have a direct effect on the health of workers and the environment. Volatile organic compounds or VOCs are chemicals which vaporise at room temperatures. Traditional solvents used for cleaning have low boiling points and a high VOCs making them harmful to use and less eco-friendly Exposure to the VOC’s released by these cleaning agents must be controlled to prevent respiratory, allergic, and immune system complications for users. If your company uses industrial degreasing agents regularly, it is time to evaluate the implications of this choice.

Clarea® is a less volatile alternative than conventional cleaners. Highly refined aliphatic hydrocarbons with minimal residues and tight vaporisation ranges are capable of providing the same results and can be substituted to create a safer, sustainable, eco-friendly workplace. The low odour, low flammability and low toxicity of Clarea® solvents provides performance and operator and environmental acceptability using less material at lower costs. Multipurpose use can reduce the inventory of cleaning fluids stocked.

Clarea
® HC40 
for brush and hand wiping, air dries. Flash point 40℃.

Clarea
® HC62
 for dip cleaning with agitation or ultrasonics. Low evaporation. Non-flammable. 

The Clarea® range of solvents is supplied through our distributors worldwide who can supply information on best practice and the best process and equipment to meet your specifications.

We can provide you with a Material Safety Data Sheet, independent laboratory reports, product samples or technical assistance. For more information or advice please contact us by telephone on +44 (0) 20 8281 6370 or use our website our contact form.

All products are supplied and supported by EnviroTech Europe Ltd.

Manufactured in the United Kingdom and available on short delivery times through our dedicated team of distributors in Europe and the Middle East.

For information, advice and pricing visit:
https://www.solvent-cleaners.com/industrial-solvent-cleaners/

Envirotech Europe

EnviroTech Surface Technologies supply a complete range of metal cleaning, surface treatment and protection systems which are cost effective, energy efficient and safe for users and the environment. Products are supplied through a qualified network of distributors throughout the UK and Europe.

The Best In Surface Treatment

EnviroTech Surface Technologies supply a complete range of metal cleaning, surface treatment and protection systems which are cost effective, energy efficient and safe for users and the environment. Products are supplied through a qualified network of distributors throughout the UK and Europe

Products and Services
Ensolv – Vapour Degreasing Solvents For Precision Cleaning
Environmentally friendly precision vapour degreasing and cleaning solvents for the aerospace, precision engineering, medical, optical and electronic industries.

EnSolv vapour degreasing solvents are the most effective alternative to trichloroethylene which is due to be phased out of use in Europe during 2016. Fast economical cleaning and degreasing in one tank using minimal floor area.

Aquus – Water Based Metal Cleaning And Pretreatment Processes
A range of innovative and sustainable water based metal cleaning and surface treatment products which prepare parts and fabrications for painting, powder coating or electroplating.

Phosphating systems are available to meet the needs of all manufacturers from office furniture to household appliances and for other more demanding applications in transport, aerospace, construction, oil and marine industries.

CORR-EX – Corrosion Protection Solutions
Specialist barrier film corrosion protection products, based on synthetic materials to provide safe, effective, environmentally friendly solutions to lubrication and corrosion problems.

Our solutions help to lubricate and control corrosion, and are unexcelled in preventing deterioration and contamination. Solutions for derusting, passivation, sealing and anti-corrosion packaging are also included in our product range.

Clarea – Industrial Degreasing Solvents
Environmentally safe wipe, brush, dip and immersion cleaning solvents for removing dirt, oil, grease and other contaminants from surfaces without causing harm or leaving residue.

A growing concern regarding environmental issues and health hazards of the most commonly used chlorinated solvents as degreasing agents has led to the formulation of this range of safer industrial cleaning solvents.

  • Our products and treatments offer a combination of benefits:
  • Cost effective solutions for all your metal cleaning and surface treatments needs
  • Processes are safe, environmentally friendly and energy efficient
  • Excellent customer service, technical support and training from qualified distributors throughout Europe

ProSolv – lower cost high performance fluorocarbon cleaning solvent

ProSolv – enables high performance cleaning at lower cost than other fluorinated solvent cleaners.A proprietary tertiary azeotropic formulation based on a fluorinated solvent which can be a direct replacement for chlorinated solvents ProSolv is extremely stable and simple to use meeting all the increasingly stringent legislative demands for safer, non flammable solvents with low environmental impact for the precision engineering and electronics industries

View full profile