Product Details Supplier Info More products

Elscint Automation, a vibratory-parts feeder manufacturer, recently completed a bowl feeder for the feeding of light plastics containers.

Elscint used a large bowl with a diameter of 1050mm.

It used the Elscint Model 630 drive unit, which has a rating of 1500VA with half-wave operation with four coils.

The coils are totally encapsulated and are CE certified.

The drive unit is CE certified for machinery safety, low voltage and electro-magnetic compatibility.

The plastics containers measured 55 x 85 x 20mm, with one side open.

The requirement was to get the containers standing with the open side facing the sky, then rotate them 360 degrees so that an air jet could be used when the open side faced the ground, to remove dust.

It achieved this with a speed of 60 pieces a minute.

Elscint completed this job with a stainless-steel bowl with Elscinthane red-colour coating.

Elscint allows bowl feeding of plastics containers

Elscint Automation, a vibratory-parts feeder manufacturer, recently completed a bowl feeder for the feeding of light plastics containers.

Elscint used a large bowl with a diameter of 1050mm.

It used the Elscint Model 630 drive unit, which has a rating of 1500VA with half-wave operation with four coils.

The coils are totally encapsulated and are CE certified.

The drive unit is CE certified for machinery safety, low voltage and electro-magnetic compatibility.

The plastics containers measured 55 x 85 x 20mm, with one side open.

The requirement was to get the containers standing with the open side facing the sky, then rotate them 360 degrees so that an air jet could be used when the open side faced the ground, to remove dust.

It achieved this with a speed of 60 pieces a minute.

Elscint completed this job with a stainless-steel bowl with Elscinthane red-colour coating.

View full profile