Product Details Supplier Info More products

For a limited period, Fluke is offering a free Fluke 233 Remote Display Multimeter to European purchasers of Fluke 190C/215C/225C Series Scopemeters.

The Scopemeters must be purchased by 31 July 2010 and the Fluke distributor’s invoice, with a voucher downloaded from www.fluke.co.uk/scopemeteroffer, must be sent to the address on the voucher.

The Fluke 190C/215C/225C Series Scopemeters feature high-resolution colour displays and offer bandwidths up to 200MHz and sampling rates up to 2.5GS/s.

The Fluke 233 Multimeter features a removable display that will operate wirelessly up to 10m from the point of measurement.

The Fluke 215C and 225C Scopemeters are aimed at maintenance specialists who deal with industrial buses, networks and general electronics.

They verify electrical signal quality on industrial buses including Profibus, Foundation, Modbus, CAN-bus, RS-485 and more.

They offer signal quality validation of all the signal parameters and feature floating and fully isolated inputs for true differential signal measurements.

Like the Fluke 190C Series, the 225C and 215C offer a wide range of test capabilities including FFT analysis for identifying individual frequency components contained in a signal.

The Trendplot paperless recording function helps uncover long-term trends and shows changes in any of the measurable parameters (such as the rise time of a signal).

The Scoperecord function allows long records of waveform recordings to be made over a period up to 48 hours.

A Replay function enables the user to take a closer look at any anomaly seen flashing by on the screen, by replaying the last sequence of 100 screen images.

The Fluke 233 Remote Display Multimeter gives users flexibility in difficult test situations.

By sliding the wireless display out of the meter body, the user can place the display where it is most easily seen, while putting the meter in the best position to take measurements.

The radio transmitter automatically turns on when the display is removed from the meter and off when the display is re-attached.

The removable display is magnetic and has a flat bottom, so it can be mounted or placed on a flat surface for viewing.

The Fluke 233 provides measurements up to 1,000V AC and DC and up to 10A for use in CAT IV 600V/CAT III 1,000V working environments.

It offers a 10,000uF capacitance range, measures frequencies to 50kHz and captures min/max and average readings automatically.

It also includes a built-in thermometer that enables users to take temperature readings without carrying a separate instrument.

Fluke Calibration

Fluke Corporation was founded in 1948, specialising in electrical test and measurement products. Early in its history, Fluke recognised that the very best electrical metrology would be needed to support its products and undertook to develop this capability. From this activity, the calibration business was born. Over the years, many breakthrough calibration products were introduced, establishing Fluke as a leader in electrical metrology.

In 2000, Fluke acquired Wavetek Precision Measurement. In 2001, Fluke’s calibration business expanded into the temperature field with the acquisition of Hart Scientific and then into pressure and gas flow with the acquisition of DH Instruments (2007), followed by Ruska and Pressurements (2010).

The unified business’s unmatched breadth and depth in metrology puts Fluke Calibration in a unique position to deliver today’s and tomorrow’s calibrations solutions to customers who demand the very best, supported by an organisation they can count on for the long term.

View full profile