Product Details Supplier Info More products

Fluke has introduced electrical power standards designed to deliver stable, precise reference power and energy for use in calibrating electrical measurement equipment.

The Fluke 6105A and 6100B Electrical Power Standards provide stability and accuracy for users including national measurement institutes, instrument service and calibration firms, electronics manufacturers, power utilities and standards laboratories.

The Fluke 6100B Power Standard features improved accuracy and increased voltage channel current drive for calibrating energy meters that take power from their voltage input.

The Fluke 6105A provides all the functionality of the 6100B, with even better accuracy to match that of the best measurement devices for sinusoidal waveforms.

The 6105A Electrical Power Standard provides the accuracy required to verify the performance of secondary standards such as the Radian Research RD and RM range, the Zera EPZ303 and COM 3003; as well as the MTE (EMH) K2006, Calport 300, SRS PRS PWS and PTS series products.

Waveforms with high harmonic distortion are also delivered with similar accuracy traceable to national and international standards.

Both models meet all accuracy requirements of power quality testing to the IEC 61000-4 series of standards.

The 6100B can also be used to type test 0.1 to 2 per cent energy meters, while the 6505A has the highest accuracy available for calibrating and type testing secondary standard energy meters and Watthour meters.

A calibration adjustment regimen can maintain traceability for one-, two-, three-, or four-phase systems using a single-phase power/energy meter with accuracy determined by the meter used.

This regimen can be applied to 6100B or 6105A Masters and their Auxiliary counterparts.

A Microsoft Windows user interface makes the 6100B and 6105A simple to operate.

The interface can be accessed through a combination of front panel knobs and buttons, or by connecting the user’s own mouse and keyboard.

Actions are then viewed on the high-resolution, 8in TFT display.

Status information on all four phases is displayed, alongside more detailed information on current parameters being set or adjusted.

The 6100B and 6105A can be operated under remote control.

Where multiphase systems are operated, control of the Auxiliary devices is via the Master unit.

The 6100B and 6105A conform to the IEEE 488.1 standard and supplemental standard IEEE 488.2.

The programming language complies with the Standard Commands for Programmable Instruments (SCPI).

Complex instrument setups can be saved and recalled within the instrument or saved and recalled from a USB storage device.

View full profile