Product Details Supplier Info More products

Clarea® solvent cleaners are compatible with all metals, composites and most plastics used to remove dirt, oil, grease, or other contaminants from surfaces without causing harm or leaving residue. They are used as immersion cleaners for component cleaning in manufacturing and engineering industries and as wipe cleaners for large surface areas prior to painting or powder coating.

The environmental concerns and health hazards of the chlorinated solvents used as industrial degreasing agents has led to the formulation of this EnviroTech range of safer cleaning solvents.

What to consider when choosing suitable solvent cleaning products?

Solvents used for cleaning must be highly refined and leave no residues on drying. They need to be highly effective removing oils and soils without causing damage or corrosion of the parts or components being processed and leave minimal residues.

Cleaning specifications vary widely from very demanding automotive and aerospace applications to less demanding applications where critical cleaning is not needed such as pre-used parts or assemblies from the transportation, aerospace, or manufacturing equipment sectors. Heavily contaminated when removed from service these must be free of oils, soils, grease and dirt before disassembly prior to refurbishing and rebuilding. Much of this work will be manual and the considerations for the safety of operators, hand wiping or brush cleaning is paramount.

Clarea® products are aliphatic hydrocarbon based low odour degreasing solvents with specified flash points. They will remove oils, greases, hydraulic fluids cutting fluids and a wide variety of hydrocarbon based protective coatings. Clarea® solvents can be safely used with all metals and composites and most plastic and paint finishes.

Clarea®HC40 is low odour degreasing fast drying solvent with a flash point of 40°C. It is suitable for ultrasonic and dip systems and can be used with brush or in hand-wipe processes. Clarea®HC62 is a degreasing solvent with a flash point over 60°C. It is suitable for hand-wipe applications when used externally.

EFFICIENT AND ECONOMICAL

  • Versatile and cost-effective solutions for all your industrial cleaning
  •  Minimal odour and low toxicity for operators
  • Multipurpose uses can reduce the inventory of cleaning fluids.
  • Flexible uses – evaporation rates suitable for hand wipe, spray, or immersion tank cleaning
  • Clarea HC40 for brush and hand wiping, air dries. Flash point 40°C
  • Clarea HC62 for spray or immersion cleaning Flash point 62°C
  • Contains no chlorine, other halogens or stabilisers
  • Compatible with all metals and composites and most plastics
  • Excellent pre-cleaner for paint or powder coatings
  • Safe, reliable, environmentally friendly cleaning

FURTHER INFORMATION

Please visit our website  www.envirotech-europe.com/solvent-cleaners/ for information about other uses and applications.  For more advice, please telephone us on +44 (0) 20 8281 6370 or use our website contact form.

All products are supplied and supported by EnviroTech Europe Ltd. Manufactured in the United Kingdom and available on short delivery times through our dedicated team of distributors worldwide.

supplied and supported by

EnviroTech Europe Ltd

EnviroTech Europe Ltd supply a complete range of metal cleaning, surface treatment and protection systems which are cost effective, energy efficient and safe for users and the environment. Products are supplied through a qualified network of distributors throughout the UK and Europe.

The Best In Surface Treatment

EnviroTech Europe Ltd supply a complete range of metal cleaning, surface treatment and protection systems which are cost effective, energy efficient and safe for users and the environment. Products are supplied through a qualified network of distributors throughout the UK and Europe

Products and Services
Ensolv – Vapour Degreasing Solvents For Precision Cleaning
Environmentally friendly precision vapour degreasing and cleaning solvents for the aerospace, precision engineering, medical, optical and electronic industries.

EnSolv vapour degreasing solvents are the most effective alternative to trichloroethylene which is due to be phased out of use in Europe during 2016. Fast economical cleaning and degreasing in one tank using minimal floor area.

Aquus – Water Based Metal Cleaning And Pretreatment Processes
A range of innovative and sustainable water based metal cleaning and surface treatment products which prepare parts and fabrications for painting, powder coating or electroplating.

Phosphating systems are available to meet the needs of all manufacturers from office furniture to household appliances and for other more demanding applications in transport, aerospace, construction, oil and marine industries.

CORR-EX – Corrosion Protection Solutions
Specialist barrier film corrosion protection products, based on synthetic materials to provide safe, effective, environmentally friendly solutions to lubrication and corrosion problems.

Our solutions help to lubricate and control corrosion, and are unexcelled in preventing deterioration and contamination. Solutions for derusting, passivation, sealing and anti-corrosion packaging are also included in our product range.

Clarea – Industrial Degreasing Solvents
Environmentally safe wipe, brush, dip and immersion cleaning solvents for removing dirt, oil, grease and other contaminants from surfaces without causing harm or leaving residue.

A growing concern regarding environmental issues and health hazards of the most commonly used chlorinated solvents as degreasing agents has led to the formulation of this range of safer industrial cleaning solvents.

  • Our products and treatments offer a combination of benefits:
  • Cost effective solutions for all your metal cleaning and surface treatments needs
  • Processes are safe, environmentally friendly and energy efficient
  • Excellent customer service, technical support and training from qualified distributors throughout Europe

ProSolv – lower cost high performance fluorocarbon cleaning solvent

ProSolv – enables high performance cleaning at lower cost than other fluorinated solvent cleaners.A proprietary tertiary azeotropic formulation based on a fluorinated solvent which can be a direct replacement for chlorinated solvents ProSolv is extremely stable and simple to use meeting all the increasingly stringent legislative demands for safer, non flammable solvents with low environmental impact for the precision engineering and electronics industries

View full profile