Product Details Supplier Info More products

When choosing the appropriate material, users should always consider the area of application. Marcus Schneck, CEO of norelem explains why it is crucial to use operating parts made of high-quality materials as this can ensure the reliability and stability of the components used and products produced.  

When looking around the factory floor, as sure as day, a gleaming array of metallic instrumentation and machinery will be looking back at you. That being said, innovations in both plastic materials and process capabilities, coupled with changes in industry demands have closed many of the physical and cost performance gaps that once existed between metal and plastic.

The materials chosen are naturally an important factor to consider when using standard and operating components. The right choice of materials guarantees high-quality, durable products whilst finishes and surface treatments ensure components such as grips and knobs are also visually appealing.

Composite materials, such as Glass fibre reinforced PPA (Polyphthalamide) can also be beneficial to use in the manufacturing and engineering sectors due to its lightweight properties, relative stiffness, strength and durability. These materials are growing in popularity too, with the global composites materials market growing at about 5% per year, with carbon fibre demand growing at 12% per year.

The correct material for every application

Of course, a range of factors should be considered when choosing components and the materials they are made from. Important selection criteria can be anything from tensile strength, corrosion resistance, operating temperature to chemical resistance. Considering these elements as well as the environment the material will be used in will aid you in choosing a material fit for the chosen application.

The most commonly used materials used within the engineering and manufacturing industry are plastics, steel, aluminium, cast iron, non-ferrous metals and stainless steels.

The use of plastic within the engineering industry has seen that plastic-to-metal conversion can result in savings of 25-50% due to the elimination of fastener and assembly needs. Plastic can be used for multiple applications such as hydraulic presses, granulators or plastic extrusion lines to name a few.

Meanwhile, inserts such as bushes or threaded pins can be made of steel, stainless steel or brass that offer high impact properties, making it a desirable material to use within machinery. A combination of plastic and metal materials can be very beneficial when used in unison, utilising the best of both material properties.

When working with pull handles, tubular handles, recessed handles as well as clamping and tension levers the proportion of metal components is slightly higher. Knurled knobs, palm grips and star grips are made mostly of plastic due to the materials user-friendly properties.

Electrical discharge, friction and high temperatures are three challenges within engineering and manufacturing industries that require specific materials to be used in order for machinery and components to operate efficiently and safely.

Don’t chance electrical discharges

Special applications require specific materials – a good example of this is antistatic operating parts. These parts are made of an electrically conductive plastic and thus prevent electrostatic discharges, which can impair sensitive electronic components.

Using components made of antistatic thermoplastic which comply with DIN EN 61340-5-1 and can be used in ESD (Electrostatic Discharge) protection zones. These ESD products are also used for devices, components and protection systems in areas with high risk of explosion.

Materials and insulators if chosen correctly can eliminate electrical discharges altogether, providing a safe and secure working environment, whilst reducing the chances of machinery needing maintenance further down the line.

Electrostatic discharges occur quite frequently during production, assembly or transport, antistatic operating elements provide a remedy here. Ensuring components are regularly tested for its correct electrical conductivity, in accordance with strict standards whilst carrying the yellow ESD logo for clear identification is vital for the machinery and workers safety.

Can you handle the heat?

Glass fibre reinforced PPA (Polyphthalamide) – a composite material which, in contrast to conventional plastics, is particularly dimensionally stable – is a common choice of material in a high heat zone. Components made from this material can withstand a temperature of 150°C and short term even temperatures up to 250°C.

These products find use in a number of industries such as medical technology, where the components have to withstand steam sterilisation. They are also a good choice for all areas of equipment construction where high ambient temperatures prevail.

Components made of glass bead-reinforced thermoplastic, mainly used for the inside of operational handles, ensure very good wear and gripping comfort – even in wet areas. Choosing the right material is also crucial for your workers safety, ensuring the materials used aren’t going to retain the heat and scald/injure a worker when operating the machinery.

Avoid machinery wearing down

With a wide range of materials to choose from in the industry, it’s important to choose the right material for the right application in order to keep machinery and components working smoothly.

When working in a high friction area polyacetal guarantees high hardness and a low coefficient of friction, however, polyketone offers a much longer service life and optimum power transmission. Due to the exceptionally high abrasion resistance and very good tribological properties of polyketone, the susceptibility to tooth fracture is also significantly reduced.

The use of bearing surfaces such as lead, or copper will also reduce the risk of friction amongst components and machinery parts. Sufficiently lubricating areas which may incur friction will also lessen the chances of friction and wear.

With the industry bridging the gap between metal and plastic materials, engineers and manufacturers are having to make the decision on what material is best for certain applications.

Converting to plastic parts can give manufactures more freedom and flexibility, including a greater selection in materials. Of course, metal materials have a trusted reputation for being robust and durable, but plastic certainly can be as good as its metal counterparts, is quickly becoming the go to material for its flexibility and lightweight properties.

For more about norelem please visit: www.norelem.co.uk.

norelem UK

norelem view themselves as part of a dynamic culture of innovation. We are continually expanding our product portfolio of standard and specialist elements. That is why we have invested in modern logistical structures which enable us to react flexibly and promptly to our customers’ needs delivering the highest quality products and service.

About norelem

norelem is a world-leading manufacturer and supplier of flexible standard parts and components for mechanical engineering. The company supplies 60,000 standard products relating to standard machinery and operating elements, as well as automation components.

All these components are detailed in THE BIG GREEN BOOK, norelem’s ideas catalogue and a reference book, ninety-eight per cent of these parts are available from stock, and the business delivers on-site technical support for products. This high level of inventory enables norelem to provide fast and reliable delivery.

About THE BIG GREEN BOOK

THE BIG GREEN BOOK is both norelem’s ideas catalogue and a reference book, and has become the norelem trademark. More than just a standard product catalogue, THE BIG GREEN BOOK represents everything norelem stands for, combining product information, specifications, and technical information, with best practice references, advice, and guidance.

The 2020 version of THE BIG GREEN BOOK is in fact now so big and so comprehensive that it is split into two volumes. You can request the bumper, two-volume print or USB version including 3D CAD data by emailing thebiggreenbook@norelem.co.uk.

About norelem ACADEMY

As the global standard component specialist, norelem helps students, universities and companies with free, specialised lectures in the fields of toolmaking and drive technology through norelem’s training arm, norelem ACADEMY.

Coordinated to your requirements, norelem can offer 90-minute specialist lectures providing insight into the different areas of engineering, and how to bring these insights directly into your practice.

norelem ACADEMY also supports engineering student teams across the globe. By donating components and encouraging knowledge transfer, our experts help close skills gaps and launch the careers of tomorrow’s engineering talent. Global initiatives that norelem supports include Formula Student and The World Solar Challenge, while norelem also holds its own yearly engineering competition, Engineering Newcomer.

Visit our website link: https://bit.ly/2TCEKSF

 Telephone link: +44 121 222 5322

View full profile