Product Details Supplier Info More products

Dexter Research Center has introduced a low-cost module for non-contact temperature measurement with integrated ASIC.

The MD-0003 module, which is housed in a TO-5 housing, utilises the SMBus with two wires, allowing up to 100 sensors to be linked to each other.

This component is available for 3 and 5V applications.

The measurement range spans -70 to 310C and, in the interval from 0 to 50C, a repeatability of 0.5K is achieved.

The rate of emission can be adjusted externally.

A calibration by the manufacturer is stored in the ASIC.

All data apply to thermal equilibrium.

The sensor is available on a standard basis without imaging optics with a fan angle of 90deg.

The MD-0004 evaluation board is available on an optional basis and is controlled using a USB interface and a PC.

The set comes complete with simple test software.

Laser Components

The Laser Components Group was formed in 1986 and is located at six locations in Germany, France, UK, Canada and USA, employing more than 120 people worldwide. In-house production accounts for approximately half its turnover, with partner suppliers accounting for all other business.

Laser Components manufactures and supplies components, OEM modules, sources, optics and detectors, spanning the UV to the FIR. 

Products include:  

  • Photodiodes, including avalanche photodiodes, position sensitive detectors and PIN diodes
  • IR components, including IR detectors, IR emitters and optical components for IR
  • Single photon-counting modules, including accessories and silicon avalanche photodiodes for photon counting
  • Lasers, including laser diodes, laser modules and emitters for telecommunication
  • Measurement devices, including amplifiers, laser power detectors, and measurement instruments
  • Fibre optics, including optical fibres, assembled fibres, active and passive components and accessories
  • Optics, including laser optics, optical filters, optomechanical components, optical components and polarisers
  • Laser accessories, including laser safety products and spare parts and accessories
  • E-beam (physical vapour deposition) ion-assisted deposition and sputtering coating capabilities to the standard catalogue or customer-specific specifications.  

View full profile