Product Details Supplier Info More products

With Omniflex’s range of Teleterm M2 management systems, the user can select the input or output type for either monitoring and control, which can then be connected to the sensor or activator.

The Teleterm M2 range has many different network interfaces such as Ethernet Modbus/TCP, Modbus RS485, radio and GSM/GPRS, which enables the data to be graphically displayed and logged locally on a PC in the building or facility, as well as via the web.

The system also has an SMS capability enabling a selection of alarms or analogue values to be sent to mobile phones to notify building/facility managers or maintenance staff of out-of-limit conditions.

Maintenance staff are given the ability to control the RTU outputs using SMS text messages from mobile phones.

The Teleterm M2 product also has a local SD memory card fitted to provide local data logging, so that in the event of a loss of the network important data is not lost.

The system also acts as a stand-alone controller, therefore if the network is lost the Teleterm M2 will carry on providing local monitoring and safe control if necessary.

Omniflex has the capability to integrate complete BMS/FMS monitoring and control solutions from initial functional design to installation, commissioning, training and future maintenance and support.

Omniflex

The company was founded in 1965, formerly known as Conlog, specialising in process control, alarm/event management and instrumentation products and systems. In 1997, the original instrumentation business division of the company changed its name to OMNIFLEX Ltd.

The company was founded in 1965, formerly known as Conlog, specialising in process control, alarm/event management and instrumentation products and systems. In 1997, the original instrumentation business division of the company changed its name to OMNIFLEX Ltd.

Omniflex works across all business sectors including pharmaceuticals, hospitals, oil, gas, nuclear, water, electrical distribution and energy monitoring.

The company has its offices in the UK, South Africa, and Australia, and the company’s products are sold on five continents. Product ranges include well-known brands such as OMNI SIL alarm annunciators, OMNITERM SIL signal conditioning, MAXIFLEX intelligent remote terminal units (RTU) and I/O systems and the MAXILARM/Omni 4000 alarm/event management systems.

We bracket ourselves as a ‘remote monitoring specialist’, using data acquisition systems, with better than 1mS timestamp at the IO point (from several I/O up to thousands of I/O),  alarm event management including multiplexing systems, telemetry systems, Data2Desktop using standard web browsers, over varying forms of media and high-integrity (SIL1) annunciator systems.

A particular area that Omniflex is also very strong in is obsolescence issues on old legacy alarm annunciators systems. We have, in most cases, a solution for replacement of Rochester, Highland and Robinson’s annunciator systems. Our alarm annunciator systems have been substantiated by Sellafield for and on behalf of all the nuclear operators.

An area that we can offer customers significant cost savings is through the use of our CONET networking technology, which is supported by many of our RTU / PLC products. Using our CONET network technology allows existing installed cabling to be used therefore significant cabling/installation costs can be avoided. A typical example of this whereby our customer in the nuclear industry used our CONET technology, retained their existing cabling and infrastructure, saved them in the region of £1m on cabling and scaffolding.

As a worldwide supplier, OMNIFLEX provides technical training, back-up and application engineering support to a variety of industry partners including local distributors, value-adding resellers and systems integrators, to provide superior levels of service to the end user.

View full profile