Product Details Supplier Info More products

The Korloy Pro-X Mill, available from Cutwel, is a multi-functional milling tool specially designed for high-speed machining of aluminium.

The Pro-X Mill is suitable for face milling, copying, helical cutting, ramping, slotting and 90-degree shoulder milling.

All cutter bodies are manufactured from a super-rigid alloy steel and are nickel-coated, which makes them more durable and wear resistant.

Each cutter has laser-marked information showing cutter designation and maximum rev/min.

The Pro-X Mill offers strong clamping of the insert due to the concave part on the seating side of the insert.

The highly polished insert enables good chip flow with less built-up edge.

The insert chip breaker has a 3D design for low cutting load.

Inserts come with various corner radius sizes to suit different applications.

The high rake angle of the insert provides good surface finish with low cutting forces.

The Pro-X Mill can also be used for machining aluminium alloys, magnesium, magnesium alloys copper, and plastics.

For aluminium alloys, example cutting speeds and feeds are: Vc – 1200m/min; feed rate – 0.3mm per tooth.

Full technical backup is offered on insert selection, speeds, feeds and recommended depths of cut.

Pro-X Mill suits high-speed machining of aluminium

The Korloy Pro-X Mill, available from Cutwel, is a multi-functional milling tool specially designed for high-speed machining of aluminium.

The Pro-X Mill is suitable for face milling, copying, helical cutting, ramping, slotting and 90-degree shoulder milling.

All cutter bodies are manufactured from a super-rigid alloy steel and are nickel-coated, which makes them more durable and wear resistant.

Each cutter has laser-marked information showing cutter designation and maximum rev/min.

The Pro-X Mill offers strong clamping of the insert due to the concave part on the seating side of the insert.

The highly polished insert enables good chip flow with less built-up edge.

The insert chip breaker has a 3D design for low cutting load.

Inserts come with various corner radius sizes to suit different applications.

The high rake angle of the insert provides good surface finish with low cutting forces.

The Pro-X Mill can also be used for machining aluminium alloys, magnesium, magnesium alloys copper, and plastics.

For aluminium alloys, example cutting speeds and feeds are: Vc – 1200m/min; feed rate – 0.3mm per tooth.

Full technical backup is offered on insert selection, speeds, feeds and recommended depths of cut.

View full profile