Product Details Supplier Info More products

By working closely with a manufacturer of hydraulic pumps and motors, Schaeffler has optimised a number of bearings used in Sauer-Danfoss’ H1 series of axial piston pumps and motors.

The optimised X-life cylindrical and tapered rolling bearings have increased the overall efficiencies of the H1 pumps and H1 motors by around two per cent.

According to the company, by utilising a new H1 hydraulic pump and two H1 hydraulic motors, a wheel loader that has a drive power of 140kW can save around 9kW.

Projected onto 1,000 wheel loaders operating for eight hours a day, annual savings potential could reach 26,000MWh.

This is equivalent to the average energy consumption of more than 6,500 households with three occupants and results in an annual saving of approximately EUR5m (GBP4m), or around 16,000 tonnes of CO2.

In developing the H1 series, as well as optimising and improving the electro-hydraulic system itself, Sauer-Danfoss focused on optimising the base components within the hydraulic pumps and motors.

The various bearing positions on the pumps and motors were scrutinised down to the last detail in order to identify where any improvements could be made.

New low-friction optimised rolling bearing solutions from Schaeffler had a significant influence on reducing power loss, installation space and weight across the H1 range.

A new option for an H1 axial piston pump in swashplate configuration was achieved by using new swashplate cradle bearings.

Here, compact low-friction cylindrical roller bearings were used to support the drive shaft.

Compared with the previous version, the installation space and weight were substantially reduced and efficiency was increased by around two per cent.

Schaeffler’s new X-life cylindrical roller bearings with optimised rib contact are said to have made an important contribution to these design improvements.

The curvature of the roller end faces improves the contact geometry between roller end faces and the bearing ribs, minimising contact pressures.

This enables the formation of a load carrying lubricant film, whereby roller end faces and ribs are completely separated by the lubricant.

The rollers now slide on the lubricant film under axial load.

This means that the new cylindrical roller bearings can operate with a much higher ratio of the axial load to the radial load.

The ratio that is achievable is 0.6 – a permissible axial load that is 60 per cent of the radial load.

At the same time, the frictional torque is up to 50 per cent lower, depending on the magnitude of the axial load.

The benefits are lower operating temperatures, higher efficiency and reduced energy consumption.

H1 axial piston motors in swashplate configuration utilise low-friction, optimised X-life tapered roller bearings.

In addition, a steel sealing ring improves the sealing characteristics of the hydraulic piston motor.

In this way, the length and weight of the axial piston motor can be reduced.

Furthermore, the power losses have been cut by approximately two per cent, compared with the previous version.

In the X-life tapered roller bearings, optimised rib contact is also critical.

Especially under axial load, the frictional torque of conventional tapered roller bearings increases.

Therefore, Schaeffler redesigned the bearing geometry, surfaces and materials, as well as the dimensional and running accuracies of the X-life tapered roller bearings.

As a result, these bearings now yield up to 20 per cent higher basic dynamic load ratings, resulting in an increase of around 70 per cent in basic rating life.

At the same time, higher dimensional and running accuracies, combined with improved surface topography, reduce the frictional torque by up to 75 per cent compared with conventional bearings.

The contact geometry of the inner ring rib and the roller end face were also redesigned in order to reduce friction.

This reduces the stress on the lubricant in the bearing, enabling maintenance intervals to be extended.

The X-life tapered roller bearing also operates at a much lower noise level.

View full profile