Product Details Supplier Info More products
Screen Shot 2016-07-29 at 14.49.37

As critical navigational aids that run continuously around the clock, marine gyroscopes require super precision ball bearings that are reliable, low friction and quiet, ensuring a long operating life.

Typical marine gyroscope applications use angular contact ball bearings in a back-to-back configuration mounted at either end of the drive shaft. The bearings are often oil-lubricated with ceramic balls and extremely smooth mirror finish raceways to reduce noise levels and friction. The bearings are clean-room assembled and the rings are 100% visually inspected for defects to ensure a long operating life.

During the 19th and early 20th century the increasing use of steel in ships brought about a need to overcome the unreliability of the magnetic compass when used within a steel hull. Hence, the invention of the gyrocompass, which is a navigational aid commonly used by marine vessels that employ some kind of electrically powered, fast-spinning gyroscope wheel.

A gyrocompass is a marine device that is able to detect the direction of true north and not magnetic north. Variations in the Earth’s magnetic field that deflect normal compasses do not affect a gyrocompass. The gyroscope inside a gyrocompass system is mounted in such a way so that it can move freely to enable its axis of spin to settle parallel with true north when influenced by the Earth’s rotation. A gyrocompass is used to navigate the ship, find positions and record routes. Modern ships now use a GPS system or other navigational aids to feed data to the gyrocompass for correcting any errors.

As a complex electromechanical system, a gyroscope requires bearings that are low friction, quiet and reliable. Typically, for marine gyroscope applications, Barden provides angular contact ball bearings with an extremely robust, single piece polymer cage, with either steel or ceramic (silicon nitride) balls. An increased ball complement is usually provided to ensure lower noise levels and an increased operating life. As gyroscopes run continuously at all times, the operating life of the bearings is critical.

Most gyro bearings are oil-lubricated rather than greased, although some gyroscopes do use greased bearings. A typical gyroscope application will incorporate two oil-lubricated open (not sealed) angular contact ball bearings with an oil sump between the bearings. This is sealed with a wick material that soaks up the oil and transfers it, drop by drop, to the bearings. This oil is returned back to the sump and the lubrication process is repeated. The oil itself is normally a military specification synthetic oil.

Ball bearings for gyroscopes rotate at speeds of around 10,000 to 12,000rpm, so in terms of Barden’s super precision bearings, this is relatively low speed. Barden bearings are manufactured to ABEC 7 standards often with raceway roundness held to limits that exceed the ABEC standards requirement. The bearings are assembled in class 100 cleanroom conditions. The bearing rings are 100 per cent visually inspected in order to check for any defects on the raceways. This process is critical to guarantee a long operating life of the bearings. Any slight scratch or scuff mark on the rings can trigger wear, which could lead to a reduced operating life of the bearing and premature failure.

Bearing cages are normally made from special materials such as polyamide-imide, a high-temperature plastic with good wear resistance. These robust cages can operate in temperatures in excess of 200°C. Typically, a bearing for a gyroscope has a bore diameter of around 5mm. Two bearings are normally required: one on each end of the rotor shaft in a back-to-back configuration.

Another key requirement is that the gyroscope operates with low noise levels. The bearings are therefore fitted to the system and bench tested. Barden gyro bearings achieve low noise levels by their low friction properties and extremely smooth ‘mirror finished’ raceways.

Barden

The Barden Corporation specialises in the design and manufacture of super precision ball bearings used in high performance applications across a broad range of market sectors. The company’s extensive product line includes key components for the aerospace and defence sectors, vacuum pumps, food processing, robotics and medical equipment.

The Barden Corporation specialises in the design and manufacture of super precision ball bearings used in high performance applications across a broad range of market sectors. The company’s extensive product line includes key components for the aerospace and defence sectors, vacuum pumps, food processing, robotics and medical equipment.

These products are predominantly radial, single and double row, angular contact or deep groove super precision ball bearings, which are offered in thousands of standard variations, although a significant proportion of production is devoted to special bearings. Bearings come in inch or metric dimensions with diameters ranging from 4mm (0.16″) outer diameter (OD) up to 180mm (approx 7″) OD and can operate comfortably at speeds of two million dN (bore in mm x RPM) or above. A variety of bearing seals, shields and metallic/non-metallic cage designs are available for all products.

Barden’s engineering team is able to offer unique solutions to bearing-related challenges by developing bearings and complex assemblies to assist customers in reducing parts count, assembly time and operating costs. Products across all ranges can meet and usually exceed ISO P2 (ABEC 9) standards whilst also offering full traceability back to raw materials where required.

The Barden Corporation is a key strategic member of the multinational Schaeffler Group, which specialises in bearing technologies and precision products for aerospace, industrial plant and automotive industries and has over 82,000 employees at approximately 170 locations in 50 countries. Schaeffler is headquartered in Germany and oversees three main brands: FAG, INA and LuK. Barden’s activities are supported by sister sites, The Barden Corporation (US) based in Danbury, USA, and the Winsted Precision Ball Company in Connecticut, USA.

View full profile