Supplier Network +Add your company

Suppliers A-Z

SuperCORR A aerosols – corrosion control for extreme conditions.

By EnviroTech Europe Ltd on

Product Details Supplier Info More products

Most people associate corrosion control with rust, which only happens in things made of ferrous metals such as steel girders, ships, iron pipes, steel reinforcement rods, and steel tanks and is the reason metals deteriorate and fail.  Ferrous and non-ferrous metals corrode on contact with both fresh and saltwater as well as water vapour. They will also corrode when they come into contact with chemicals, liquid acids as well as acidic vapours, salts and bases, and bacteria.

Corrosion is also a problem in electronics from circuit breakers and contactors to wire bond connectors and soldered components on a printed circuit board. Electrical connectors and plugs are very prone to corrosion as well as non-ferrous metals and alloys such as copper and aluminium. For purposes here, corrosion can be defined as a chemical or electrochemical reaction between a material, usually a metal, and its environment that produces a deterioration of the material and its properties.

Corrosion is an increasingly serious and costly problem that can lead to plant and equipment failures which range from being an annoyance to being catastrophic. Failures caused by corrosion could and do lead to a direct failure of a component which could affect the entire system and can not only be very expensive in terms of down time to repair or replace plant and equipment, but can also prove to be very costly in loss of productivity but to human life.

Preventing Disaster with corrosion control

If an electrical component fails that affects your car that is just an annoyance and can be repaired fairly inexpensively and if you’re driving the car rolls to a stop and you get out. However, if an electrical system failed because of a corroded electrical contact in a control circuit which caused another electrical failure in the master fuel control system on an airliner at 30,000 feet with 250 people on board that could prove to be catastrophic. While the electrical contacts in both cases failed due to corrosion both failures could very well have been prevented by using Super CORR A in a Corrosion Prevention Program incorporated into all routine maintenance programs.

Mild Steel panel exposed to sea spray on board ship for 6 months.
A: Oil based CPC, B: Untreated section, C: Treated with SuperCORR A,
demonstrating its superior performance

It is clear that the use of SuperCORR A for corrosion control can bring financial savings in reduced maintenance and replacement costs and more importantly greater safety
It is much simpler and a lot less costly to prevent corrosion than to repair or replace the damaged equipment or component that failed because of corrosion. The photographs show the effects of protecting metal surfaces and components in extreme condition with a SuperCORR A aerosol.

SuperCORR A is a non-conductive, non- flammable, hydrophobic, ultra-thin film lubricant and corrosion preventive compound. It is a “self-healing” ultra-thin coating that lubricates and protects metals, motors, electrical and electronic components from moisture, salts, chlorides, acids, and oxidation.

Corrosion of electrical components is very prevalent problem and one that can be prevented. Preventing moisture from coming in to contact with the electrical components is the key. An ultra-thin film of SuperCORR A will not only prevent moisture from coming in to contact but will displace moisture that is there already.

Super CORR A is hydrophobic, that is it repels water and forms a “self-healing” ultra-thin film barrier that prevents moisture from coming into contact with the coated electronic components.

For further information please visit:  https://www.envirotech-europe.com/corrosion-control/

Lubricant and Corrosion Prevention Compound

 

For more information please visit:
www.corrosion-protect.com

supplied by:

EnviroTech Europe Ltd.
46 high Street, Esher, Surrey
KT10 9QY United Kingdom
Tel +44 (0) 208 281 6370

www.envirotech-europe.com

EnviroTech Europe Ltd

EnviroTech Europe Ltd supply a complete range of metal cleaning, surface treatment and protection systems which are cost effective, energy efficient and safe for users and the environment. Products are supplied through a qualified network of distributors throughout the UK and Europe.

Visit our website 0208 281 6370

The Best In Surface Treatment

EnviroTech Europe Ltd supply a complete range of metal cleaning, surface treatment and protection systems which are cost effective, energy efficient and safe for users and the environment. Products are supplied through a qualified network of distributors throughout the UK and Europe

Products and Services
Ensolv – Vapour Degreasing Solvents For Precision Cleaning
Environmentally friendly precision vapour degreasing and cleaning solvents for the aerospace, precision engineering, medical, optical and electronic industries.

EnSolv vapour degreasing solvents are the most effective alternative to trichloroethylene which is due to be phased out of use in Europe during 2016. Fast economical cleaning and degreasing in one tank using minimal floor area.

Aquus – Water Based Metal Cleaning And Pretreatment Processes
A range of innovative and sustainable water based metal cleaning and surface treatment products which prepare parts and fabrications for painting, powder coating or electroplating.

Phosphating systems are available to meet the needs of all manufacturers from office furniture to household appliances and for other more demanding applications in transport, aerospace, construction, oil and marine industries.

CORR-EX – Corrosion Protection Solutions
Specialist barrier film corrosion protection products, based on synthetic materials to provide safe, effective, environmentally friendly solutions to lubrication and corrosion problems.

Our solutions help to lubricate and control corrosion, and are unexcelled in preventing deterioration and contamination. Solutions for derusting, passivation, sealing and anti-corrosion packaging are also included in our product range.

Clarea – Industrial Degreasing Solvents
Environmentally safe wipe, brush, dip and immersion cleaning solvents for removing dirt, oil, grease and other contaminants from surfaces without causing harm or leaving residue.

A growing concern regarding environmental issues and health hazards of the most commonly used chlorinated solvents as degreasing agents has led to the formulation of this range of safer industrial cleaning solvents.

  • Our products and treatments offer a combination of benefits:
  • Cost effective solutions for all your metal cleaning and surface treatments needs
  • Processes are safe, environmentally friendly and energy efficient
  • Excellent customer service, technical support and training from qualified distributors throughout Europe

ProSolv – lower cost high performance fluorocarbon cleaning solvent

ProSolv – enables high performance cleaning at lower cost than other fluorinated solvent cleaners.A proprietary tertiary azeotropic formulation based on a fluorinated solvent which can be a direct replacement for chlorinated solvents ProSolv is extremely stable and simple to use meeting all the increasingly stringent legislative demands for safer, non flammable solvents with low environmental impact for the precision engineering and electronics industries

View full profile