Supplier Network +Add your company

Suppliers A-Z

Ultrasonic flow meter for process and control

By Titan Enterprises on

Product Details Supplier Info More products
image001

Titan Enterprises announces the Process Atrato – a new low volume, high performance ultrasonic flow meter packaged to address the challenges of the process and control environment.

The compact Process Atrato flow meter combines all the technological advantages of market-leading Atrato ultrasonic technology (high linearity, high sensitivity, wide flow range linearity, no moving parts, fast response time, can be installed anywhere) with a new durable construction. Built from 316 stainless steel and PEEK – the Process Atrato is supplied sealed to the IP65 standard.  The combination of durable housing and top performance, in a very reliable flow meter, delivers a new tool for engineers at a reduced cost of ownership compared to existing flow measurement technologies serving the process and control market.

Rated for use up to 65°C and 20 Bar the Process Atrato is available in 4 models operating over flow ranges from 2 ml/min to 15 litres per minute, accuracy is ±1% over the whole flow range. Each Process Atrato is calibrated with a pre-set ‘K’ factor so all meters of the same flow range are fully interchangeable simplifying assembly and set-up procedures for OEM manufacturers looking to integrate the flow meter into their process and control set-up.

As standard the Process Atrato comes with two frequency outputs (PNP and NPN).  Two multicolour LEDs indicate signal strength, power malfunctions and pulse outputs.   Electrical connections are through a standard M12 four pin, sensor connector.

Using patented technology that enables it to operate with excellent accuracy over very wide flow ranges, the Atrato range of inline flow meters is a genuine breakthrough in flow meter technology.  The advanced Atrato signal processing system permits flow measurement across the whole Reynolds number range allowing both viscous and non-viscous products to be metered anywhere.

Titan Enterprises

With more than 40 years’ experience in flowmeter innovation — Titan Enterprises Ltd is a UK-based manufacturer of high-performance solutions such as the Atrato ultrasonic flowmeter, oval gear flowmeters and the low flow turbine flowmeters and instrument range. Our knowledgable team can offer either an off-the-shelf meter or fully bespoke flow system designed for a particular application, whether it is a low-cost OEM solution or a specialist flowmeter in exotic materials you are looking for.

Visit our website 01935 812790

With more than 40 years’ experience in flowmeter innovation — Titan Enterprises Ltd is a UK-based manufacturer of high-performance solutions such as the Atrato ultrasonic flowmeter, oval gear flowmeters and the low flow turbine flowmeters and instrument range. Our knowledgable team can offer either an off-the-shelf meter or fully bespoke flow system designed for a particular application, whether it is a low-cost OEM solution or a specialist flowmeter in exotic materials you are looking for.

Titan’s company philosophy of ‘pushing the envelope by trying to do things a little different and better’ has resulted in sales of more than 500,000 products in 50 countries worldwide and a repeat purchase percentage of 95 per cent — something that founder Trevor Forster is justly proud of.

Today, Titan supplies innovative flow measurement solutions to a broad range of sectors, including medical, industrial, food and drink, laboratory and pharmaceutical. Its latest innovation — the Atrato flowmeter range — is set to challenge conventional flowmeter thinking the world over. The culmination of eight years’ research and development in collaboration with the Department of Process & Engineering at Cranfield University (UK), it can handle low flows from laminar to turbulent and is largely immune from viscosity effects.

For higher-volume users we can tailor the design of a flowmeter to match your exact application requirements and thus not compromise achievable results with a less-than-ideal sensor. The resultant device would be unique to your application but would still benefit from Titan’s tried-and-tested, modern manufacturing methods to ensure a competitive OEM solution. From an initial concept Titan can offer a complete service from budget costings through prototypes to full production. Often the cost of origination and tooling can be amortised over the life of the product.

All flowmeters produced by Titan are designed and manufactured to ISO9001 and calibrated to an uncertainty of ±0.25 per cent. We produce chemically resistant, high-accuracy digital flowmeters that are not only competitively priced but are engineered to give long-term reliable performance.

However, the value of a flowmeter cannot be judged by price alone. Often in industrial applications the reliability of a product far outweighs the initial purchase price as ‘downtime’ is extremely expensive. At Titan, we endeavour to produce devices that are inherently reliable but are manufactured using the latest and most economical production techniques.

Typical applications overview

  • Flow batching
  • Engine test metering
  • Oil flow measurement and metering
  • Hydraulic fluid measurement and metering
  • High-viscosity fluid measurement and metering
  • OEM equipment
  • Chemical plant measurement and metering
  • Hazardous areas (simple apparatus)
  • Laboratory use
  • Cooling equipment measurement and metering
  • Drink dispensing
  • Semiconductor plant

View full profile