Product Details Supplier Info More products

Using patented ultrasonic flow meter technology, that enables it to operate accurately over wide flow ranges, the Process Atrato from Titan Enterprises incorporates advanced signal processing system permitting both viscous and non-viscous fluids to be metered.

The Process Atrato is a compact flow meter designed to provide fast response time, high sensitivity and wide flow range linearity – all in an IP65 (NEMA 4X) enclosure. With no moving parts the highly reliable Process Atrato flow meter is a cost-effective device for engineers looking to monitor the flow of liquids in industrial processes.

Features of the Process Atrato include an IP65 sealed enclosure, two frequency outputs of PNP and NPN, two multicolour LED light indicators (for pulse outputs, power malfunctions, and signal strength), and standard M12 four pin sensor connector for electrical connections.

Rated for use up to 65°C and 20Bar, the compact Process Atrato is available in 4 models operating over flow ranges from 2ml / min to 15 litres / min, featuring an accuracy of ±1% over the whole flow range. Each Process Atrato is calibrated with a pre-set ‘K’ factor so all meters of the same flow range are fully interchangeable simplifying assembly and set-up procedures for OEM manufacturers looking to integrate the flowmeter into their process and control set-up.

Process Atrato ultrasonic flowmeters include a USB interface which permits users to directly monitor the rate and total on a computer while also altering some of the operating parameters, such as the pulse resolution and units.

For further information please visit https://www.flowmeters.co.uk/process-atrato-process-control-ultrasonic-flowmeter/ or contact Titan Enterprises on +44-1935-812790 / sales@flowmeters.co.uk.

Titan Enterprises

With more than 40 years’ experience in flowmeter innovation — Titan Enterprises Ltd is a UK-based manufacturer of high-performance solutions such as the Atrato ultrasonic flowmeter, oval gear flowmeters and the low flow turbine flowmeters and instrument range. Our knowledgable team can offer either an off-the-shelf meter or fully bespoke flow system designed for a particular application, whether it is a low-cost OEM solution or a specialist flowmeter in exotic materials you are looking for.

With more than 40 years’ experience in flowmeter innovation — Titan Enterprises Ltd is a UK-based manufacturer of high-performance solutions such as the Atrato ultrasonic flowmeter, oval gear flowmeters and the low flow turbine flowmeters and instrument range. Our knowledgable team can offer either an off-the-shelf meter or fully bespoke flow system designed for a particular application, whether it is a low-cost OEM solution or a specialist flowmeter in exotic materials you are looking for.

Titan’s company philosophy of ‘pushing the envelope by trying to do things a little different and better’ has resulted in sales of more than 500,000 products in 50 countries worldwide and a repeat purchase percentage of 95 per cent — something that founder Trevor Forster is justly proud of.

Today, Titan supplies innovative flow measurement solutions to a broad range of sectors, including medical, industrial, food and drink, laboratory and pharmaceutical. Its latest innovation — the Atrato flowmeter range — is set to challenge conventional flowmeter thinking the world over. The culmination of eight years’ research and development in collaboration with the Department of Process & Engineering at Cranfield University (UK), it can handle low flows from laminar to turbulent and is largely immune from viscosity effects.

For higher-volume users we can tailor the design of a flowmeter to match your exact application requirements and thus not compromise achievable results with a less-than-ideal sensor. The resultant device would be unique to your application but would still benefit from Titan’s tried-and-tested, modern manufacturing methods to ensure a competitive OEM solution. From an initial concept Titan can offer a complete service from budget costings through prototypes to full production. Often the cost of origination and tooling can be amortised over the life of the product.

All flowmeters produced by Titan are designed and manufactured to ISO9001 and calibrated to an uncertainty of ±0.25 per cent. We produce chemically resistant, high-accuracy digital flowmeters that are not only competitively priced but are engineered to give long-term reliable performance.

However, the value of a flowmeter cannot be judged by price alone. Often in industrial applications the reliability of a product far outweighs the initial purchase price as ‘downtime’ is extremely expensive. At Titan, we endeavour to produce devices that are inherently reliable but are manufactured using the latest and most economical production techniques.

Typical applications overview

  • Flow batching
  • Engine test metering
  • Oil flow measurement and metering
  • Hydraulic fluid measurement and metering
  • High-viscosity fluid measurement and metering
  • OEM equipment
  • Chemical plant measurement and metering
  • Hazardous areas (simple apparatus)
  • Laboratory use
  • Cooling equipment measurement and metering
  • Drink dispensing
  • Semiconductor plant

View full profile