Product Details Supplier Info More products

Peter Bennett, sales and marketing director of Gardner Energy Management, explains how companies could avoid wasting energy through steam loss by the introduction of a steam trap.

In the past, energy management was not a core function for many processing and manufacturing companies.

However, the continuing and unwavering increase in energy prices together with ongoing legislation regarding carbon emissions has put energy management on the boardroom agenda.

The Carbon Trust has recently ascertained that UK companies waste GBP1bn a year on energy, largely due to energy plant optimisation issues, energy wastage and inefficient energy usage across the manufacturing site.

In an announcement late last year, the Carbon Trust said that last summer alone, businesses were emitting over eight million tonnes of carbon dioxide, the equivalent to Birmingham’s annual carbon emissions and enough to fill the new Wembley stadium 1,000 times.

Across manufacturing, including the food, drink and chemical sectors, the amount of energy spent is GBP1.8bn, of which 12 per cent (GBP226m) is wasted.

Steam has been a popular mode of conveying energy since the industrial revolution.

It is used extensively in industry for generating power and is also utilised within process industries such as sugar, paper, oil refineries, petrochemicals, chemicals, food, synthetic fibre and textiles.

As a heat transfer medium, steam has an advantage over fluids such as hot water and oil as it is able to store very large quantities of heat, which can be given up at constant temperature as the steam condenses.

Unfortunately, more energy is lost in industry through steam wastage than through any other medium.

Research studies by industry experts in early 2000 suggested that losses from steam systems make up approximately 35 per cent of all identified potential energy savings.

The purpose of installing steam traps is to obtain fast heating of the product and equipment by keeping the steam lines and equipment free from condensate, air and non-condensable gases.

A steam trap is a device that discharges condensate and air from the line or piece of equipment without discharging the steam.

The three important functions of a steam trap are: to discharge condensate as soon as it is formed; not to allow steam to escape; and to be capable of discharging air and other condensable gases.

However, around 10 per cent of mechanical steam traps will fail each year.

Traps that fail to ‘open’ result in a loss of steam and its energy.

Where condensate is not returned, the water is lost as well.

The result is significant economic loss, directly via increased boiler plant costs, and potentially indirectly via decreased steam heat capacity.

Steam leakage is a visible indicator of waste and accounts for up to 11 per cent of steam consumption in a small or medium scale industry rising up to 55 per cent in high usage processing industries.

Steam traps need to be working at optimum efficiency with a minimum impact on the environment.

For example, for each litre of heavy fuel oil burned unnecessarily to compensate for a steam leak, approximately 3kg of CO2 is emitted to the atmosphere.

Steam traps can have different sized orifices to suit different conditions.

If a trap leaks steam, the amount wasted will depend on the size of the trap and the steam pressure.

The cost of waste will also depend on the number of traps and the operating time.

For example, a process plant with 200 traps based on an average trap size of DN20 and a stream pressure of 14-bar (g) with 10 per cent failing annually will have steam wastage of 8,900 tonnes.

If the overall cost of steam for this plant were GBP10 per tonne, the direct cost of ignoring these leaking steam traps would be GBP178,000 each year, which is equivalent to well over one million litres of fuel oil.

The cost to the environment would be 3,000 tonnes of CO2 dumped into the atmosphere.

UK manufacturers are looking for ways of reducing overheads and many are cutting maintenance budgets and staff.

The consequence is a spiral of ever-increasing steam loss and escalating fuel bills as mechanical steam traps fail to open.

This has given management two options: either minimal maintenance and watch the steam plume from the condensate receiver rise along with the fuel, water and chemical treatment costs; or regularly test, repair and replace faulty mechanical traps at considerable ongoing cost.

To be efficient and economical, a steam trap has to: minimise the loss of steam; provide long lasting and dependable service by minimising trap testing, repair, cleaning, downtime and other associated losses; be corrosion resistant to prevent the damaging effects of acidic or oxygen-laden condensate; ventilate air for efficient heat transfer and to prevent system binding; and remove CO2 to prevent the formation of carbonic acid.

This means that the steam trap must function at or near steam temperature since CO2 dissolves in condensate that has cooled below steam temperature.

The steam trap must also operate against the actual backpressure build-up in the return lines and be free of the dirt collected by the condensate as it travels through the distribution piping and on to the boiler.

Even particles passing through strainer screens are erosive and, therefore, the steam trap must be able to function in the presence of dirt.

There are numerous steam traps available and selecting the correct type of steam trap is an important element of any steam system.

While thermostatic, thermodynamic and mechanical are extensively used, the fixed orifice condense discharge trap is now becoming the steam trap of choice.

Instead of utilising a valve mechanism to close off steam for maximum energy and water conservation, the venturi orifice design effectively drains condensate from the steam system.

As these steam traps have no moving parts to wedge open or fail, they provide the ultimate in reliability necessitating only minimal maintenance and requiring no spares, testing or monitoring equipment.

They are available in a range of options for specific applications, manufactured from corrosion resistant stainless steel and are performance guaranteed for 10 years.

Unfortunately, when it comes to steam traps, people often ignore them.

This complacency is costing steam users much more than they realise.

The hard reality of a plant maintaining its boiler and forgetting about the rest of the steam system can be a horribly wasteful proposition.

Losses can include not only wasted energy but also replacement of damaged equipment and misuse of man hours.

Fortunately, installing low maintenance orifice venturi steam traps can avert much of these potential losses.

Thermal Energy International Inc is an innovative technology company providing custom energy and emission reduction solutions. Our award-winning energy recovery, conservation and bioenergy solutions provide significant financial and environmental benefits to our customers. Our experience and talent in waste energy recovery recycling and bio-energy conversion solutions are unrivalled. These solutions provide our clients with typical energy cost savings of 10 per cent to 35 per cent or more with commensurate reductions in greenhouse gases and other emissions.

We go beyond the realm of single application or product competitors and instead provide our clients with maximum opportunities to reduce energy and emissions. Through a unique mix of process, energy, environmental, financial and other expertise combined with the best technology solutions and financial offerings, our clients can expect compelling returns exceeding 30 per cent and solutions with an excellent track record of longevity, proven reliability and performance.

Thermal Energy's core business provides three primary client benefits:

  • Energy consumption and cost reduction
  • Commensurate greenhouse gas and emission reductions
  • Excellent financial returns

With energy cost trends projecting steady increases over the next several years, our solutions provide increasingly more attractive returns and a means for our clients to shield themselves against ever-increasing energy costs.

View full profile