Supplier Network +Add your company

Suppliers A-Z

Why using SuperCORR A for connector maintenance on portable gas generators improves electrical supplies in extreme conditions

By EnviroTech Europe Ltd on

Product Details Supplier Info More products

Gas Turbine generators are used for electrical power supplies by extraction industries and manufacturing plants in remote and hostile locations. Dusty and wet environments in deserts, mines, grinding mills, pulp and paper mills and on land or sea drilling rigs for gas and oil production.

Portable generators maintain aircraft services at standings are connected and disconnected many times a day in extreme weather conditions.

These applications and locations test connector seals allowing dust or water to infiltrate. This with the flexing of the connecting cables allows sufficient movement between the metal surfaces of the connecting pins to produce fretting corrosion which reduces, interrupts or produces failures in electrical supply.   Regular maintenance of electrical connectors and control systems is vital to be certain of uninterrupted supply.    

SuperCORR A is an aerosol lubricant containing corrosion preventive compounds, which, as is the case with all lubricants,can be worn off over time.

A leading manufacturer of connectors tested SuperCORR A to see what the “life” of the lubricant was in a “rub test”. The typical test is 20,000 cycles, i.e. unplug, plug in is one cycle. The test results demonstrated that after 20,000 cycles there were no failures. It was decided to take it one more step and run the same tests for 200,000 cycles. The results again showed no indications of galling or scoring on the connectors at all. The connector looked and tested as good as new. This test was run under clean conditions in a laboratory but demonstrates the effectiveness of the protective lubricant in SuperCORR A.

As it meets Mil- MIL-DTL-87177B (Revised MIL-L-87177A) specifications SuperCORR A is used by the U.S. Air Force to protect the intricate workings of the F-16 Fighter Jet and by the U.S. Navy on the P 3 Orion electronic surveillance aircraft. Commercial aviation aircraft manufacturers recommend it for electrical and close metal mechanical application, especially where flights are in salt fog or high humidity.

Containing extremely long-lasting, proprietary anti-corrosive inhibitors SuperCORR A provides a superior lubrication coefficient and protects components against moisture, wear, general and fretting corrosion, surface static electricity, corona, and other electro migration problems. The super thin non-flammable lubricant film is only 7 microns (0.007 mm) thick and is formulated without sulphates, chlorides or halogens to meet the RoHS directive. It is unexcelled in preventing deterioration and contamination on all surfaces of electronic equipment.

Very fast drying environmentally acceptable solvents are used as carriers and propellants which will not affect most plastics, substrates, metals or other materials used in connector manufacture.

The aerosols are supplied with probes allowing access to pins and connector tubes where the low surface tension repels water, dirt dust and metal particles from blind holes and surfaces to produce thoroughly clean holes before a second application applies the lubricant film. Reconnection to the supply with cleaned sections of the connector ensures reliable operation even in the most testing of environments.  This easy maintenance from one can of SuperCORR A allows this essential task to be carried out in any conditions quickly, easily and securely.

For more information please visit www.envirotech-europe.com/supercorr-a.

To discuss the use of SuperCORR A to solve your problems please use the website contact form or phone us, we look forward to hearing from you.

supplied and supported by

                 

EnviroTech Europe Ltd

EnviroTech Europe Ltd supply a complete range of metal cleaning, surface treatment and protection systems which are cost effective, energy efficient and safe for users and the environment. Products are supplied through a qualified network of distributors throughout the UK and Europe.

Visit our website 0208 281 6370

The Best In Surface Treatment

EnviroTech Europe Ltd supply a complete range of metal cleaning, surface treatment and protection systems which are cost effective, energy efficient and safe for users and the environment. Products are supplied through a qualified network of distributors throughout the UK and Europe

Products and Services
Ensolv – Vapour Degreasing Solvents For Precision Cleaning
Environmentally friendly precision vapour degreasing and cleaning solvents for the aerospace, precision engineering, medical, optical and electronic industries.

EnSolv vapour degreasing solvents are the most effective alternative to trichloroethylene which is due to be phased out of use in Europe during 2016. Fast economical cleaning and degreasing in one tank using minimal floor area.

Aquus – Water Based Metal Cleaning And Pretreatment Processes
A range of innovative and sustainable water based metal cleaning and surface treatment products which prepare parts and fabrications for painting, powder coating or electroplating.

Phosphating systems are available to meet the needs of all manufacturers from office furniture to household appliances and for other more demanding applications in transport, aerospace, construction, oil and marine industries.

CORR-EX – Corrosion Protection Solutions
Specialist barrier film corrosion protection products, based on synthetic materials to provide safe, effective, environmentally friendly solutions to lubrication and corrosion problems.

Our solutions help to lubricate and control corrosion, and are unexcelled in preventing deterioration and contamination. Solutions for derusting, passivation, sealing and anti-corrosion packaging are also included in our product range.

Clarea – Industrial Degreasing Solvents
Environmentally safe wipe, brush, dip and immersion cleaning solvents for removing dirt, oil, grease and other contaminants from surfaces without causing harm or leaving residue.

A growing concern regarding environmental issues and health hazards of the most commonly used chlorinated solvents as degreasing agents has led to the formulation of this range of safer industrial cleaning solvents.

  • Our products and treatments offer a combination of benefits:
  • Cost effective solutions for all your metal cleaning and surface treatments needs
  • Processes are safe, environmentally friendly and energy efficient
  • Excellent customer service, technical support and training from qualified distributors throughout Europe

ProSolv – lower cost high performance fluorocarbon cleaning solvent

ProSolv – enables high performance cleaning at lower cost than other fluorinated solvent cleaners.A proprietary tertiary azeotropic formulation based on a fluorinated solvent which can be a direct replacement for chlorinated solvents ProSolv is extremely stable and simple to use meeting all the increasingly stringent legislative demands for safer, non flammable solvents with low environmental impact for the precision engineering and electronics industries

View full profile