Technology being developed in the US could be used to convert waste heat generated by industrial processes into electricity.
The high-efficiency thermal waste heat energy converter actively cools electronic devices, photovoltaic cells, computers and large waste heat-producing systems while generating electricity, according to Scott Hunter, who led the development team at the US Department of Energy’s Oak Ridge National Laboratory (ORNL).
‘In the US, more than 50 per cent of the energy generated annually from all sources is lost as waste heat, so this actually presents us with a great opportunity to save industry money through increased process efficiencies and reduced fuel costs while reducing greenhouse-gas emissions,’ said Hunter.
Hunter’s technology is said to use cantilever structures that are about 1mm2 in size. It is claimed that about 1,000 of these energy converters can be attached to a 1in square surface such as a computer chip, concentrated photovoltaic cell or other devices that generate heat.
Although the amount of electricity each device can generate is small — one to 10 milliwatts per device — many arrays of these devices can be used to generate sizable amounts of electricity that can power remote sensor systems or assist in the active cooling of the heat-generating device, reducing cooling demands.
The underlying concept, pyroelectricity, is based on the use of pyroelectric materials that have so far demonstrated thermal to electricity conversion efficiencies from around one to five per cent.
According to ORNL, this is also the case for techniques using thermoelectric, piezoelectric and conventional pyroelectric platforms. Using arrays of cantilevered energy converters that feature fast response and cycle times, Hunter’s team expects to achieve efficiencies of 10 to 30 per cent — depending on the temperature of the waste heat generator — in an inexpensive platform that can be fabricated using standard semiconductor manufacturing technology.
‘The fast rate of exchange in the temperature across the pyroelectric material is the key to the energy conversion efficiency and high electrical power generation,’ said Hunter, adding that ORNL’s energy scavenger technology is able to generate electrical energy from thermal waste streams with temperature gradients of just a few degrees up to several hundred degrees.
The device is based on an energy-harvesting system that features a micro-electro-mechanical (MEMS) pyroelectric capacitor structure that when heated and cooled causes current to flow in alternate directions, which can be used to generate electricity.
In this configuration, cantilevers are attached to an anchor that is fixed to a waste heat generator substrate. As this substrate becomes hot, the cantilever also heats and bends because of the bi-material effect, similar in principle to the bi-metal switch used in room and oven thermostats.
‘The tip of the hot cantilever comes into contact with a cold surface, the heat sink, where it rapidly loses its heat, causing the cantilever to move back and make contact with the hot surface,’ said Hunter. ‘The cantilever then cools and cycles back to the cold heat sink.
‘The cantilever continues to oscillate between the heat source and heat sink as long as the temperature difference is maintained between the hot and cold surfaces.’