Research into using Wi-Fi transmissions as an alternative radar technology could lead to low-cost tracking and surveillance systems, according to engineers at University College, London.
The UCL team claimed technical similarities between radar and Wi-Fi signals could open the way for new uses for the increasingly ubiquitous wireless networking standard.
The popularity of Wi-Fi local area networks (LANs) that allow wireless high-speed connection to the internet has meant that a growing number of buildings and public areas are being equipped with Wi-Fi access points.
According to Dr Ingemar Cox of UCL’s department of electronic and electrical engineering, this proliferation of Wi-Fi ‘hotspots’ could allow the radio system to be used for other purposes.
‘This has the potential to be very low cost, because many indoor areas, such as airports, already have Wi-Fi,’ he said. ‘What the radar will do is just piggy-back the Wi-Fi signal.’
The UCL research is at a very early stage, but Cox said that the technical obstacles should prove possible to overcome.
‘What we have realised is that the signature of a Wi-Fi signal and a standard radar signature are very similar.’
Existing radar tracking systems send a pulse towards an object, then calculate distance based on the time it takes for the pulse to be received back at its starting point. Using Wi-Fi transmissions would work in the same way, but the signal would be coming from a number of sources.
According to Cox, this might complicate the processing, but with the use of a simple receiver system the basic principles should still apply.
The Wi-Fi radar system would be used in conjunction with video surveillance cameras, detecting someone entering a room and triggering the operation of the cameras. It could also track goods and people.
A feasibility study will investigate the concept’s compatibility with the new wave of Wi-Fi 802.15 and 802.16 technologies as part of the EPSRC-funded research. If successful, a full-scale research project should follow.
Massive new Coventry campus targets 60GWh battery output
Where will all the raw materials come from for the manufacturing process? How will they be transported to the factory and what is going to be done with the various scrap and residues?