Silver nanowire wearable sensors match hospital 'wet electrode' accuracy

The new sensor is claimed to be as accurate as the ‘wet electrode’ sensors used in hospitals, but can be used for long-term monitoring and is reportedly more accurate than existing sensors when a patient is moving.

Long-term monitoring of electrophysiological signals can be used to track patient health or assist in medical research, and may also be used in the development of new powered prosthetics that respond to a patient’s muscular signals.

Electrophysiological sensors used in hospitals, such as EKGs, use wet electrodes that rely on an electrolytic gel between the sensor and the patient’s skin to improve the sensor’s ability to pick up the body’s electrical signals. However, this technology poses problems for long-term monitoring, because the gel dries up, which can cause skin irritation and make the sensor less accurate.

According to NC State, the new nanowire sensor is comparable to the wet sensors in terms of signal quality, but is a ‘dry’ electrode in that it doesn’t use a gel layer, so doesn’t pose the same problems that wet sensors do.