Check Out Even More High Quality Instrumentation Power Supply Units From Gresham

1 min read

600-Watt IHC is a new series of AC-DC harsh environment industrial power supplies. The IHC series is aimed at ruggedized and special applications that require operation in extreme industrial environmental conditions such as, elevators, external road signs, electrolysis equipment, food processing and other outdoor applications..

IHC Series

  • 600-Watt IHC is a new series of AC-DC harsh environment industrial power supplies. The IHC series is aimed at ruggedized and special applications that require operation in extreme industrial environmental conditions such as, elevators, external road signs, electrolysis equipment, food processing and other outdoor applications.
  • Datasheet:

CFB600-300S Series

  • The CFB600-300S Series is an industry standard fullbrick DC-DC converter, providing up to 600W of output power @ single output voltages of 12, 24, 48VDC. It has a high input voltage range of 180 to 425VDC (300VDC nominal) and reinforced with a 3000VAC isolation. It also has a high efficiency of up to 91%.
  • Datasheet:

ADQ700 Series

  • ADQ700 series quarter-brick isolated DC-DC converters produce a single fully regulated 12 V output. Rated at 700 watts, these converters can deliver up to 58 amps output current and have no minimum load requirement.
  • Datasheet:

AIT02ZPFC Series

  • The AIT02ZPFC series three-quarter-brick power factor correction module accepts a wide 85–264 Vac input and presents a unity power factor.
  • Datasheet:

CFB750-300S Series

  • The CFB750-300S Series is an industry-standard Full-brick DC-DC converter, providing up to 750W of output power @ single output voltages of 12, 15, 24, 28, 36, 48VDC. It has a high input voltage range of 200 to 425VDC (300VDC nominal) and reinforced with a 3000VAC isolation. It also has a high efficiency of up to 91%.
  • Datasheets:

FXW Series

  • The 4:1 Input Voltage 1000 Watt Single FXW DC/DC converter provides a precisely regulated dc output. The output voltage is fully isolated from the input, allowing the output to be positive or negative polarity and with various ground connections.
  • Datasheet:

FXP Series

  • The 4:1 Input Voltage 1000 Watt Single FXP DC/DC converter provides a regulated dc output with capability for paralleling up to three converters delivering up to 2.8kW. Current sharing among converters is achieved using droop method and does not require a current share pin. The output voltage is fully isolated from the input, allowing the output to be positive or negative polarity and with various ground connections.
  • Datasheet:

LCM1500 Series

  • The Artesyn Embedded Power LCM1500 provides a low cost solution to Industrial and Medical single output high power requirements.
  • Datasheet:

AIF04ZPFC Series

  • The AIF04ZPFC series full-brick power factor correction module accepts a wide 85–264 Vac input and presents a unity power factor. It can also be configured to accept a DC input within the range 120–370 Vdc.
  • Datasheet:

To see even more of what we have to offer across a vast range of applications, please visit www.greshampower.com