A rubber oil seal had to be marked with a 10 character code only 1.25mm high. The set-up consisted of a Synrad laser, FH Series Flyer marking head and Synrad’s WinMark Pro software. The head had an 80mm focusing lens to provide a 116-micron spot with a 0.8mm depth of field. Text height was set at 1mm with 0.15mm of extra character spacing and a text radius of 54mm to match the seal’s curvature. With four complete passes in a total cycle time of 0.13 seconds, the rubber surface was vaporised ‘slowly’ in small increments, creating a very distinct mark.
For more information on this company click here
To add your company click here
Nanogenerator consumes CO2 to generate electricity
Nice to see my my views being backed up by no less a figure than Sabine Hossenfelder https://youtu.be/QoJzs4fA4fo